Genaral:
My company has been using high quality materials and advanced technology specializing in the production of poles between 160VA to 600KVA ,SG series three-phase transformer , the company is the latest reference to similar products Siemens CNC system developed transformers, especially between 160VA -16KVA the three-phase transformer, their shape and installation dimensions have been standardized, and Siemens 4AP series Universal products meet VDE0550, IEC439 , JB5555, GB226 and other international and national standards.
Application:
The series three phase dry type transformer are widely used in AC 50~60HZ, input, output voltage does not exceed 500V three-phase supply various occasions. Products, a variety of input and output voltage level, join groups, tap the number and location (typically ±5%),winding capacity allocation, the secondary winding single-phase equipment, rectifier circuit, is required with housing, etc. Can according to user demands meticulous design and manufacturing.
This series three-phase rectifier transformer for rectifier equipment, made after charging rectifier, voltage regulator and DC power supply purposes.
Working Environment:
Ambient air temperature: -5.C~+40.C,the highest monthly mean temperature should not exceed +30.C;
Altitude for installing place should not exceed 2000m;
When the ambient air temperature is +40.C the relative humidity should not exceed 50%, and it allows higher relative humidity under lower temperature, Max average humidity in the dampest month is 90%, meanwhile the lowest average temperature of this month is +25, and condensation on the product surface cause by temperature change should be taken into consideration on the product surface caused by temperature change should be taken into consideration.
Before youare using a good estimate total electrical capacity and use a considerable capacity of the transformer, ensure instantaneous starting not burn transformer;
The transformer in strict accordance with the relevant national standards design and production. When youuse multiple winding (multi control voltage) transformer, the capacity should be a corresponding increase in capacity of transformer voltage ratio, so as not to burn the transformer;
The installation, you should carefully check whether the date listed in the nameplate meet your requirements, after confirmation, before installation;
Power work, the transformer core and coil will generate heat (but the temperature does not exceed 80.C)is a normal phenomenon, if the temperature exceed 80.C,even smoke, you should cut off the power switch, re-check your electrical capacity used;
In transit should be possible to avoid a collision, not damp, when used, please note that maintenance to protect the transformer life.
Precautions:
.jpg){kind=spacer}
