Automatic generator motor stator coil winding machine
Introduction
The stator coil machine is used to wind wire into coils. This winding machine is equipped with four winding heads and eight operation stations. Therefore, it is of high automation and suitable for max production, especially for stators with high production capacity requirement or high slot filling rate, or small slot opening stator.
The coil winding machine automatically put the coil into the transfer former orderly. Winding mode such as auto skip,auto cutting and auto indexing could be completed at a time successively; parameter could be set in human-machine interface.
Application
This machine is suitable for 2 poles. 4 poles, 6 poles coils winding.
Specification:
| Model no. | RXL3-100 |
| Wire diameter | 0.19-1.2mm |
| Swing diameter | 220mm |
| Operation station | 8 |
| Winding head | 4 |
| Max Thickness of stator lamination | 100mm |
| Max Stator ID | 160mm |
| Max RPM | 2500rpm |
| Air source | 0.4mpa |
| Power supply | 380V- 50/60HZ |
Operator step
1.Power on the machine
2.Thread wire this this motor
3. Set the winding parameter in the touch screen
4. Press the "start" button
5. Machine will do winding process automatically
6.After finishing the winding, machine will stop
7.Take out the wire from the tooling.
Information needed for Automatic Stator Coil Winding Machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator drawing
2. Stator winding drawing
3. Winding distribution drawing
4. Other technical requirement
If possible, it will be better if customer can send us samples.
Picture show
Automatic generator motor stator coil winding machine
