36Pcs Transducer Watch UltrasonicWasherMachine 1800W SUS Materials

36Pcs Transducer Watch Ultrasonic Washer Machine 1800W SUS Materials

Machine’s Model:CN-1036

. Mainly introduction of ultrasonic cleaning machine

After long time printing, Mesh blockage is likely to result in ink, paint, glue and other dirt coating, in this case, if the mesh cannot be cleaned thoroughly, the printing effect will be effected, printing cannot work normally, anilox roller ultrasonic cleaning machine can do perfect cleaning by ultrasonic cavitation, which can cause jetting force from tiny bubbles in exploding, the contamination will be removed totally, after several minutes cleaning, the anilox roller can come back to its origin, the ultrasonic intensity is visible under controlling, the anilox roller can spin in sitting the tank top, which can avoid axis of anilox roller immersion during cleaning, the spinning force also can fall off the dirty easily in driving, KEEPLEADER design rubber roller at two sides to drive the anilox roller in spinning as couples, which is separately controlled, is easier in operation, maintenance.

. The cleaning method of ultrasonic cleaning machine

Coat the concentrated detergent on the surface of anilox roller according to the clogging degree

After several hours, put the anilox roller into the ultrasonic cleaning tank

At last, rinsing the anilox roller by cleaned water

Or put the detergent into the cleaning tank directly, its ratio depends on the clogging degree,

Ultrasonic have perfect cleaning effect, which can keep the anilox roller as clean as its new, KEEPLEADER can make to order, pls provide the diameter of your anilox roller and its anix. Also the max length of it to make a customized service

. Features of roller ultrasonic cleaning machine

Cleaning rollers, anilox, ceramic anilox, metal anilox in various industries tank made of 2MM thick 316L stainless steel, resistant to acid, alkali corrosion Motor rotation system to drive the anilox suitable for ceramic anilox / metal anilox with overflow protection and water drain system Tank and shell made of quality stainless steel Po Professional testing, quality assuranceBuild-in timer, temperature controller and counter down buzzer high quality components, clear circuit

perfect to clean roller, anilox integrated design, easy maintenance Customized design and configuration are ok.

.Specification of ultrasonic cleaning machine

Please contact CONNIE for more info and tech assistance

CONNIE has designed and modified machine to accommodate our customers' unique

and special requirements and advise us following

1. Inner size of cleaning tank

2. Cleaning parts and its contamination

3. The configuration preferred

. Buying Guide

For customers demanding multiple stage ultrasonic cleaning and high efficiency parts drying, CONNIE multi-stage consoles provide the same efficient, effective ultrasonic cleaning technology plus the ability to move the items items through additional wash and rise stages,CONNIE will design a custom-sized and custom-featured ultrasonic cleaning machine to meet your specific needs

1>. Choose your correct system

1. Heated ultrasonic cleaning

2. Heated ultrasonic cleaning + heated rinse

3. Heated ultrasonic cleaning + heated ultrasonic rinsing

4. Heated ultrasonic cleaning + heated ultrasonic rinsing + hot air drying

5. Inner size of cleaning tank, frame construction, custom color, ultrasonic frequency

2>. Choose your tank size

1. The length*Width*depth you wanting

2.  Advise CONNIE the size of your cleaning parts and cleaning efficiency

3>. Each system includes:

1. Full insulated stainless steel tanks

2. Exterior power coat finish

3. Digital temperature controls-each tank

4. Digital timer-controlled ultrasonic cleaning

5. Dual stage filtration-cleaning stage

6. Single-stage filtration rinse stage

7. Low-level float sensors-each stage

4>.  Exceed industry standards

1. All size available, including bench version

2. High quality stainless steel construction

3. For vapor degreasing, cleaning and drying applications

4. Full solution control features

. FQA

What are ultrasonic waves of ultrasonic cleaning?

Ultrasonic waves are sound waves transmitted above 20khz, or higher that the frequency detectable by humans, sounds waves are created by the vibration of an object, which causes the air molecules around it to vibrate, these vibrations cause our eardrums to vibrate, which the brains then interprets as sound when the original vibration is very fast, so the sound waves, and the pitch of the sound created is too high for the human ear to hear

In the natural world, animals like dolphins and bats are use these ultrasonic waves to communicate, but humans have discovered practical application, the most commonly known is medical ultrasonography although in the last 30 years, some organizations have discovered highly effective, chemical-free cleaning applications and technology, ultrasonic cleaning machines work in a vey similar way to a loud speaker, except the ultrasonic waves travel at a much higher frequency and through water instead of air, a high-frequency electronic generator that creates ultrasonic waves is connected to a diaphragm, a flat or cone-shaped structure similar to the visible cone-shaped portion of a loudspeaker, that generator vibrates the diaphragm at a specific high frequency, usually between 25 and 170khz, inside a specially designed water tank, the ultrasonic waves created cause the water molecules to vibrate rapidly, creating alternating waves of compression and expansion within the water, during the expansion phase, or rarefaction cycle, the liquid is torn apart, creating cavitations bubbles, these bubbles are where ultrasonic cleaning technology is born

How does ultrasonic cleaning machine work ?

Cavitation bubbles are vacuum cavities as tiny as red blood cell, or about 8 thousands of a millimeter across, they are so small that it would take 1250 of them lined up in a row to reach 1cm long

Under pressure of continuous vibration, these bubbles stretch and compress at a fast rate, once they reach a certain size, as determined by the frequency and stretch of the sound waves produces, the bubbles lose structural integrity and collapse violently, when these implosions happen near a surface, the bubbles emit high-powered steams of plasma that travel at more that 500 miles per hours and collide with, agitate and remove even very tiny particles and substances from that surface

In an ultrasonic cleaning machine, this happens millions of times per second, but because cavitations bubbles are so small, the process is both highly effective and very gentle, ultrasonic technology can be clean metals, plastics, glass, rubber and ceramics, it effectively removes a wide variety of contaminants, even if present only in trace amounts, including dust, dirty, rust, oil, grease, soot, mold, carbon deposits, polishing compounds, was, pigments, lime scale, bacteria, algae, fungus, fingerprints and biological soil

These contaminants typically are removed even if they are tightly adhered to or embedded onto solid surfaces, or if they are in remote cracks or tiny crevices of an object. For this reason, items usually do not need to be disassembled before being put safely in an ultrasonic cleaning unit

Cleaning solution?

As ultrasonic cleaning technology was developed, it was discovered that if surface tension is reduced, cavitations levels increase, cleaning solutions used with ultrasonic cleaning machines

C