Floor Panel HF Industrial Laminating Machine 75KW 36T With Cycle Stabilizer
. Product Description
High frequency laminating Machine is designed specifically for production of wooden board, floor panel, etc.
High frequency edge gluer combines the high frequency heating with 2 direction press, it is suitable for finger joint or edge glued board jointing or gluing the rim of solid wood door or other wooden blocking gluing. We also could provide the best solution for your customized plastic welding machine based on your products needs.
II. Product categories
We have divided our tarpaulin welding machines into several different product categories;
1. High frequency wooden board joining machine
2. High frequency Laminating machine
3. High frequency PVC coated fabric welding machine
4. High frequency tarpaulin welding machine
5. High frequency tensile membrane structure welding machine
6. High frequency air supported membrane structure welding machine .
7. High frequency car parking shade /sheds welding machine
III. Main Functions
Stable frequency
Oscillation Frequency: 27.12/40.68 MHZ. With a cycle stabilizer and a device for suppression of leak age of the magnetic flux. Minimal interferes with the outside equipment.
European model squareness high frequency vibration box to support more reliable
and stable in output.
Arc suppress system
With high sensitivity spark suppression circuits, Accurate detection of the imbalance current.
Can instantly cut off the supply of the oscillation loop to restrain the sparks to protect the mold,
raw materials and products. At the same time warning lights will send you the alert.
Strong out-put power
Using aluminum material with good quality and low-loss coaxial resonator. More stable output high frequency.
Stronger radiation shielding. A good output waveform. The maximum pressure up to 50T, more efficiency.
Scope of application
High Frequency Wooden Door/Board Joining Machine combines high frequency dielectric heating with 2 directions press, is suitable for finger joint or edge glued board jointing or gluing the rim of solid door or other wooden block gluing.
Charactor of High Frequency Edge Gluer
Place the glued wood slats into the feeding table, starts high frequency edge gluer, feeding cart will push the slats to the curing table, PLC sends signal to the hydraulic parts, top press plate goes down to make the wood slat flat and uniform, then back pusher pushes in to make the wood panel well glued, high frequency power starts automatically to heat the glue according to set time, after heating finish,pressure keep and high frequency stop, system starts the program of cooling, after that. back pusher moves back, top plate raise, one cycle finish. When the second feeding start, the end-finished panel or board is pushed out of curing table and fall to outlet table, then next gluing cycle starts.
Charactor of High Frequency Edge Gluer
A. PLC automatic control with auto feeding way
B. Electro components mostly use European brand like Schneider,Omron to enable stable working.
C. Strict quality control and regulation on mechanical spare like hydraulic.
. Feature & advantages
1. High Q value oscillation tube
2. The high frequency complies with international standard: 27.12 MHz
3. The machine can keep static for power sudden failure
4. High sensitive anti-sparkle device NL 5557 to avoid damaging the mould.
5. High quality Imported apparatus
6. European-model high frequency vibration barrel, more reliable and stable in output
7. Automatic thermostat to keep the temperature at best performance in welding
8. High precision high frequency regulating knob for visible control
9. Low voltage control panel for safety purpose
10. Anodized mould and tooling for longer life-span
11. Top amounted cylinder for vertical pressing, which is more uniform pressure
12. Over current protection circuit to avoid burning the oscillation tube
13. Power ranges 4kw up to 10kw for various welding size
14. The welding electrode is screw fixed, which is easy replacement
15. High frequency shield to avoid omission is optional
16. Giving pressure by level elbow joint, which can save the strength
17. Stroke distance and horizontal of electrode are adjustable
18. One oscillation vibration system control double working position
19. Thick steel plate bracket, more steady for giving pressure
20. Imported famous brand electronic and pneumatic components
. Technical Parameter
| Model | CN-75KW-P1 |
| Maximum Gluing Length | 6000mm |
| Maximum Gluing Width | 1220mm |
| Continuous Gluing Size | 1250*6000mm or more |
| Maximum Gluing Thickness | 8~150mm |
| HF Output Power | 75KW |
| Horizontal Pressure | 36T |
| Number of Horizontal Cylinders | 12 pieces |
| Vertical Pressure | 9T |
| Number of Vertical Cylinders | 3 pieces |
| Overall Size of Press Machine | 2700*2150*2100mm |
| Overall Size of In-feeding Cart | 3500*1600*800mm |
| Overall Size of Out-feeding Cart | 2000*1330*800mm |
. Our advantage
1, We have 20 years experience in H.F technology.
2, We have professional designing team .
3, We can offer technical staff go to abroad for installation and do training for all of customer from all over the world.
4, We have many agents for selling and service for customers all over the world.
5, We have build up office in India,Turkey,British etc. We offer the fast ,high value service to customers.
. Our Service
Pre-sale services
1. Provide professional technical support.
2. Send the product catalog and instruction manual.
3. Answer your question within one working day,you can contact us online or send us email.
4. Personal call or visit is warmly welcome.
Sale of services
1. We promise honest and fair, it is our pleasure to serve you as you purchasing our consultant.
2. We guarantee punctuality,quality and quantities strictly implement the terms of contract.
After-sale service
1. Where to buy our products for one year warranty and long maintenance.
2. 24 hours telephone service online.
3. A large stock of components and parts, easily-worn parts.
XI. FAQ
Q: Are you factory?
A: Yes, We are factory, all machine is made by ourselves and we can provide
customized service according to your requirement.
Q: Where is your factory? Can I visit your factory?
A: Our factory is located on Shenzhen city which near by Hongkong.
We are warmly welcome you to visit our factory, we can pick you up
when you come to Shenzhen.
Q: How to buy your machine?
A: Please send us your inquiry to our email, and we will give you Quotation and Specification
If you satisfied with our quality and price ,we will offer you the PI to make a contract
after that you place order to us and the deposit is arrived , we will proceed the order for you,
Q: How to contact you ?
A: You can click the "Contact us" in the top of the website .
Q: What about your warranty?
A: Our warranty is 2 years, all machine parts can be replaced for free within 2 years
if broken(not including man made)
Q: How long we will get the machine?
A: For machine is big goods, we and our clients usually choose the delivery by ship,
so once you place the order, we will arrange the production within 3 days,
and the delivery time is about 7-30 working days(depend the destination port) you will get the machine.
Q: Are we still need to install the machine after we got ?
A:We will adjust the machine before delivering to you , also we will send you video and manual to teach you how to use the machine.W e also can send technical staff to be your place for installation machine for you as your request.
