cablesmall Emulator For MAN Euro6 Truck New SRS Euro6 Emulators

Emulator For MAN Euro6 Truck New SRS Euro6 Emulators

EURO6 Ad-Blue Emulators Disable system:

AdxBlue system (Fully)
AdxBlue NOX sensor
DPF system
DPF temperature sensors
DPF regeneration

After installing Euro6 emulator, you can remove:

DPF sensors – YES
NOx sensor – YES (only in DAF don't remove first NOx sensor !!!)
Ad-blue temp. sensor (s) – YES
Ad-blue pump – YES
Ad-blue level sensor – YES
Ad-blue ECU – YES

Supported Euro6:

For Volvo Euro6
For DAF Euro6
For MAN Euro6
For Scania Euro6

CablesMall Kindly note: It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.

EURO6 Ad-Blue Emulators using guide:

Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of Ad-Blue Pump on the right side behind the cab, and disconnect plug from Ad-Blue Pump and connect emulator.

Next, you need to remove the fuses:

F894(Multisensor In Ad-Blue tank)
F738 (+30 Signal of Ad-Blue pump)
F1084 (NOx sensor Upstream)
Fuse F737 is now fuse of emulator.
Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regenaration.
 
Finally, you need to remove Power from NOx downstream sensor. There are two ways options, one is to cut pin 1 in NOx sensor plug, the other way (better) is toremove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) wiht yellow key.

Package Includes:

1pc x Man EURO6 Ad-Blue Emulator