Lexia 3 PP2000 Full Chip PSA Diagbox 7.65 Interface
PSA Interface Lexia3 V48 PP2000 V25 Diagbox 7.65 with 921815C full chip
Note: This Lexia 3 Full Chips package with PAS 30pin to 16pin Cable
Software Version: Lexia3 V48, PP2000 V25, Diagbox V7.65
Update: By CD
Support Multi-Language: English,
German, French, Japanese, Russian, Spanish, Portuguese, Swedish,
Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
You can use PSA Interface Checker check the firmware version and chip:
Lexia3 XS Evolution with Original Chip works with both For Citroen and Peugeot:
1. Lexia 3 with Original full chips is compatible with most of Citroen and Peugeot cars from 1995.
2. It supports read identification, read fault codes, clear fault codes, auto-scan etc. New version supports Peugeot 307.
3. It works for both Citroen and Peugeot. Now support Peugeot 307!
4. Lexia-3 PCB edge is golden with original full chips. Double PCB has 7pcs optocouplers, which are 100% original and new.
5. Lexia 3 full chips relays are 12pcs, which are 4.5V, it is more stable.
6. PP2000 have 2pcs Optocouplers
7. Original Full chips Lexia 3 Firmware: Reference Serial 921815 C/
Hardware and Software Requirements:
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB
RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and
Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
Please setup the software according to the requirements to hardware
and software. Otherwise it will fail to setup and bring you much
trouble.
Better to install the software on the computer with Windows XP system.
Better to close the Anti-virus software on your computer. Because the
Anti-virus may recognize it as a type of virus, it will clear off all
the software on the CD.
LEXIA-3 PP2000 Description:
1. It is compatible with Citroen cars including: C1, C2, C3, C4, C6, C8,
C-CROSSER, NEMO, BERLINGO, JUMPY, JUMPER, AX, SAXO, BX and so on. But
please pay attention, according to our customer's experience, this item
can not works good at C5 new models.
2. It is compatible with most Peugeot cars from 1995..If you have the
two types of cars, please pay attention, please check with us first
before purchase.
3. Diagnostics is performed via OBD-II connector (which is located near
steering wheel) or via manufacturer-specific connector (only older cars,
pre-2001).
LEXIA-3/PP2000 Full chips Function:
Unlike other universal car scanner tools which only read fault codes;
this software performs nearly ALL the functions like the original dealer
diagnostic tool. Our diagnostic interface contains K-Line multiplexor,
CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1. Read Identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear Fault Codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen
Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9
values at once, or full listing (all measured values). Logging to file
is also supported, which allows offline analysis.
6. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
LEXIA-3/PP2000 Package List:
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable(16pin)
1pc x 16pin to 2pin Cable
1pc x PAS 30pin to 16pin Cable(for old car-only older cars, pre-2001)
1pc x Instruction for Installation and Activation DVD for PP2000
