60 KW Power Double Belt Discontinuous PU Sandwich Panel Production Line with 700 ~ 1000 Width For PU Sandwich Panel
Details of Roll Forming Machines
This machine is suitable to PU sandwich production, such as wall panel and roofing panel.
The plate can insulate heat, sound, and prevent burn, widely used in roof panel, wall panel, and so on.
Main Roller Forming Machines--------------Two SETS
1: Coil width: 1220/1100mm effective width: 1000mm
2: working speed: 12-15m/min (not contain cutting)
3: roll station: 20/13 stations
4: material of roller: grade 45 steel, polished and coated with chrome
5:material of main shaft:45 steel diameter roller: 70mm
6: main power: 5.5KW
7: forming thickness: 0.3mm—0.8mm zinc and color steel, G250MPA
8: Transmission: by single Chains 1.0 inch
9: feeding and guide: surface polished and coated with chrome
10: machine drive parts adopt protect cover
11: machine adopt new station with chrome
12: size of main machine: max 8000x1300x1200(mm) L x W x H
13: weight: about 5500Kgs
14: color of machine: blue (also can choose by customer request)
15: machine should be with four legs (made from metal) in 350mm
Uncoiler For Material Feeding --------------Two SETS
- Dimensions: 1700mm*1000mm*800mm
- Width of feeding:1300mm
- Capability: 5 Ton
- Inter diameter: 450-510mm
- Mode of expand &fight: inner expand &fight by manual
- Way of feeding: manual
. PU Insulation Part
Specifications of sandwich panels producible:
Max. length 6000mm
Max width 1000mm
Thickness 30mm
Equipment used:
1. One “1+1” double-layer laminator for steel Panel
2. One set of PU foaming injection machine
Operating principle:
The sandwich panel consists of double layer CORRUGATED panel,the foam will be between these panels.
The double-layered laminator is consisted of the press and the rail stands.Initially, put the top and the bottom facing sheets inside of mould frames and then do the necessary sealing work. After that, feed the worktables into the press. When worktables inside the press moves out orderly, the other two feed in at the same time. Upon the finish of feeding, the press will close and slant at a angle, waiting for the injection PU raw materials from the PU mixing head into different panels. Meanwhile materials start foaming and curing. At this time, mould frames on worktables moved out can be opened and the finished products can be unloaded to get ready for next production cycle.
Constituents of Equipment:
One “1+1” double-layer laminator for CORRUGATED panel:
The laminator is used to make sandwich panels with the max. lenth of 6m, max. width of 1.0m and the thickness 30mm.
1. Main technical parameters
Thickness of sandwich panel 30mm
Max bearing force 0.2Mpa/cm2
Moving speed of worktable 15-20m/min
Pressing speed 10~30mm/s
<
