.jpg)
TQO (Straight Bore Four-Row Assembly)
TQO bearings are directly mounted and comprised of two double inner races, two single and one double outer race, with an inner race spacer and two outer race spacers.
Slots in the inner race spacer permit lubricant to flow from the bearing chamber to the roll neck. The inner race spacers are hardened to minimize face wear.
Size range: ID 50.800 mm to 1500.000 mm (2.0000 in. to 59.0551 in.)
OD 83.337 mm to 2032.000 mm (3.2810 in. to 80.0000 in.)
Design Attributes
Two double cones, two single cups and a double cup with a cone spacer and two cup spacers.
Spacers have slots or holes for lubrication.
Cone spacers are hardened to reduce face wear.
Numbered serially to assure correct installation sequence.
Applications
Low- and medium-speed rolling mills
SUP four-row taper roller bearings are installed as complete assemblies and take axial loads in addition to heavy radial loads, so that generally it is not requested separate thrust bearings in such arrangements.
They are commonly used in rolling mill applications.
For quick roll changes, the bearings have a loose fit on the roll necks, but there is the disadvantage that the inner rings wander on their seatings causing wear. To reduce these negative effects, SUP bearings have a helical groove in the bore and lubrication grooves in the side faces of the inner rings. These grooves enable lubricant to be supplied to the contact surfaces of the inner ring and seating.
Since wear and shock resistance under heavy rolling loads is a requirement for roll neck bearings, highest quality carburizing grade bearing alloy steels are normally used in SUP four-row taper roller bearings.
Besides, for large size bearings, pierced rollers and steel pin-type cage for maximum load ratings possible are applied.
The induced thrust resulting from radial loading is cancelled within the double cones and it eliminates excessive loads on clamping and spacing members.
They are commonly used in rolling mill applications.
For quick roll changes, the bearings have a loose fit on the roll necks, but there is the disadvantage that the inner rings wander on their seatings causing wear. To reduce these negative effects, SUP bearings have a helical groove in the bore and lubrication grooves in the side faces of the inner rings. These grooves enable lubricant to be supplied to the contact surfaces of the inner ring and seating.
Since wear and shock resistance under heavy rolling loads is a requirement for roll neck bearings, highest quality carburizing grade bearing alloy steels are normally used in SUP four-row taper roller bearings.
Besides, for large size bearings, pierced rollers and steel pin-type cage for maximum load ratings possible are applied.
The induced thrust resulting from radial loading is cancelled within the double cones and it eliminates excessive loads on clamping and spacing members.
The TQO type is composed in its standard configuration of two double cone assemblies, one central double cup, two single cups and factory adjusted cup and cone spacers.
The spacers of each bearing are face ground after accurate measurement of the distance between adjacent cups and cones to obtain the asked initial play (also defined as BEP - Bench End Play). So the bearing parts cannot be interchanged and they are individually marked for proper assembly.
Lubrication grooves and oil holes are provided in the cup spacers and in the double cup. Furthermore, lubricant slots in the cones side faces and cone spacer permit the lubricant to go through the bearing to the roll neck.
These bearings can be provided with lateral extension of the double cones used as sealing surface. This sealing feature offers better protection against hostile environment.
For high speed rolling mill requirements, the TQO bearing sets may have tapered bore with features of high capacity, compactness and a mounting system that guarantees a positive interference fit on the roll neck.
The spacers of each bearing are face ground after accurate measurement of the distance between adjacent cups and cones to obtain the asked initial play (also defined as BEP - Bench End Play). So the bearing parts cannot be interchanged and they are individually marked for proper assembly.
Lubrication grooves and oil holes are provided in the cup spacers and in the double cup. Furthermore, lubricant slots in the cones side faces and cone spacer permit the lubricant to go through the bearing to the roll neck.
These bearings can be provided with lateral extension of the double cones used as sealing surface. This sealing feature offers better protection against hostile environment.
For high speed rolling mill requirements, the TQO bearing sets may have tapered bore with features of high capacity, compactness and a mounting system that guarantees a positive interference fit on the roll neck.
Most of TQO four row taper roller bearings are manufactured with inch dimensions as per American AFBMA 19/1974 and as per SUP standard practice, dimensional and running accuracy grade is in accordance with class 2 or 4.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
