PVC Ceiling Production Line
BENK Machinery Series PVC Ceiling Production Line is mainly used in PVC Ceiling, PVC door & window profilel, wide door plate, window plate, extrusion of multi-holes pipe for passing through lines(four holes, six holes, seven holes, nine holes, etc.) For different sectional surface and molds, twin conical screw extruder of different specifications can be chosen together with corresponding vacuum calibrating table, haul-off unit, cutting unit, tilter, etc.
Capacity of main frame can be optionally chosen from 60-700 kgs/hour.
PVC Ceiling Production Line Conical twin screw extruder technical parameters:
| Model | SJSZ51/105 | SJSZ55/120 | SJSZ65/132 | SJSZ80/156 |
| Power(kw) | 18.5 | 22 | 37 | 55 |
| Screw dia(mm) | ø51/Φ105 | ø65/Φ120 | ø65/Φ132 | ø80/Φ156 |
| No.of Screw | 2 | 2 | 2 | 2 |
| Rotational Speed | 36 | 36 | 36 | 36 |
| Screw torque(Nm) | 6000 | 7000 | 10000 | 10000 |
| Output(PVC powder kg/h) | 100 | 150 | 250 | 400 |
| Central height(mm) | 1000 | 1000 | 1000 | 1000 |
PVC Ceiling Production Line Auxiliary machine technical parameters:
| Model | YF180 | YF240 | YF400 |
| Max. width (mm) | 180 | 240 | 400 |
| Haul height (mm) | 140 | ||
| Haul force(KN) | 15 | 30 | 30 |
| Haul speed(m/min) | 0.5-5 | ||
| Auxiliary equipment total power(KW) | 18.7 | 31.6 | 31.6 |
| Compression air(MPa) | 0.6 | ||
reference pictures:
draft instalaltion drawing
panel cuuter
cutting by pneumatic, save power
ceiling panel extrusion die
Thickness control and checking by red light:
Since it is a hot and widely used product, and machine is not expensive, so contact us with no hesitate if you interesting in our PVC Ceiling Production Line, best offer will be prepared for you quickly.
Thanks!
.gif)
