1200MM 22W LED T8 Tube Light with External TUV No Flicker Driver In Silver
Details:
|
Model no.
|
Dimension | LED Brand | Luminous Flux (LM) |
|
H LFL26-9W
|
2FT / 600*26MM | Epistar 2835 | 900 |
|
H LFL26-18W
|
3FT / 900*26MM | Epistar 2835 | 1800 |
|
H LFL26-22W
|
4FT / 1200*26MM | Epistar 2835 | 2000 |
|
H LFL26-28W
|
5FT / 1500*26MM | Epistar 2835 | 2200 |
Direct replacement for traditional fluorescent tubes.
Rotatable
High efficiency > 110
High luminous efficacy LEDs .
Instant on,no flicker or buzz.
No mercury allowing for non hazardous waste disposal.
Emits virtually no UV rays or IR.
Glass free for safer working conditions.
Energy saving and environment friendly.
FAQ:
Q: there are so many vendors in market who can offer similar or same appearance led products,how to distinguish good qualified led products?
Comparing the weight of housing. Because good heat sink housing is much heavier than the lighter ones for good heat dissipation.
Comparing the chips. Good and responsible vendors use 80% of Max chips current so that chips will have good performance in lumens maintained and long life span.Simple way is to get the information of the chips power and quantity of the chips.
Comparing the drivers. Drivers are the most important keys for led products. The life spans of led products are equal to that of drivers. So it’s important to adopt good quality drivers.
Remember that its no way for vendors tooffer good quality products while also offer extremely low prices.
there are some cost secrets in materials.
Q: which specs are needed to be known very well?
The data for total lumens of fixture. Some time, the lumens you get is not for the whole fixture, but the lumens of chips. These two are different conception.
Lumnens of whole fixtures are actually needed by end-customers.
Knowing well what the type of original and traditional lights and power so that you can calculate the lumens you need and decide the power of led products basing on the total lumens of fixture.
With improvement of led chips tech,the lumens efficiency had been increased a lots, so that its not correct that higher power led lights are better than lower power led lights. The Key factor is the lumens of whole fixture.
Q: What is CRI and the relationship between the CRI and Lumens?
CRI is some kind of eyes’ feeling when our eyes see the real color from objects in sunshine. Higher CRI,
higher comfort for eyes. While higher CRI, lower lumens efficiency compared to relatively lower CRI. For
LED lights, the CRI is mostly 75-80Ra, which is enough for normal usages.
Q: Can LED lights really last 50,000 hours in lifespan?
In theory, after 50,000hrs, the lumens maintain should be 70%, in fact, the lifespan can be 100,000hrs
(good quality). But we should note the lifespan of the driver or the components which is shorter than
50,000hrs. Normally the lights can last less than 30,000hrs. so drivers are also much more important
for led lights.
Bussiness Line:
-- LED Light:
1. LED Linear Light:LED Seamless linkable linear light, LED Water-proof IP65 linear light,
2. LED Tri-proof light: IP65, IP44
3. LED Tube Light: T8/T5 compatible tube light, T8/T5/T6 tube light with external driver, T8/T5 Integrated tube light.
4. LED Track Light
5. LED Panel Light
6. Solar Street Light, LED Street Light
-- LED Driver: Non-flicker, Emergency
Driver: Non-Flicker TUV Driver made by our own factory. We are also a professional manafacture on LED driver from 1987.
