Main Features:
*Recommend use PV panels:300W/Vmp>34V/Voc<50V
*Max input voltage:50V
*Peak power tracking voltage:25V-40V
*Operation voltage range:17V-50V
*MIN/MAX start voltage:22V-50V
*MAX input current:9.8A
*Output AC voltage:90V-140/180~260VAC
* Rated Output Power:230W
* Wave Form:Pure Sine Wave
* System Operation:APL/MPPT
*Recommend using the power more than 30W and the standard voltage of 36V PV panels.Suggestion making the PV in parallel.
* Installation:Waterproof IP65 ,outdoor Type Design
System Function:
1,Power line carrier-current communication(Only used in WVC series)
2, 6-grade power search
3,Operation voltage range:17V-50V
4,High-frequency two-way and one-way grid function
5,Kinds of frequency output function.
6,Directly connected to the solar panels (do not need to connect the battery)
7,AC 0 angle with high precision auto-detection
8,Synchronous High-frequency Modulation
9,Pure Sine Wave Output
10,Automatic Sensing Function Solar Luminosity
11,Power Automatically Locked (APL)
12,Automatically Adapt To Different Load Power Factor
13,Constant Current, Constant Power
14,Automatically Shut Down When The Power Grid Fault
15,Stack Multiple Machines
16,High-Frequency High Conversion Rate
17,Maximum Power Point Tracking (MPPT)
System function:
Power line carrier-current communication
6-grade power search
Wide voltage input(22-60VDC)
High-frequency two-way and one-way grid function
Kinds of frequency output function.
Directly connected to the solar panels (do not need to connect the battery)
AC 0 angle with high precision auto-detection
Synchronous High-frequency Modulation
Pure Sine Wave Output
Automatic Sensing Function Solar Luminosity
Power Automatically Locked (APL)
Automatically Adapt To Different Load Power Factor
Constant Current, Constant Power
Automatically Shut Down When The Power Grid Fault
Stack Multiple Machines
High-Frequency High Conversion Rate
Maximum Power Point Tracking (MPPT)
Stack using
In order to achieve higher power use requirements, this product can be stacked. Such as: 4 micro inverter of 260W stacking can achieve 1040W. And the number of the stacking is unlimited.
LED display
Finished all the connections, confirm the AC and DC connection is right. The LED is red when the AC power is unconnected and the LED shows like below when the AC power is connected. The LED shows like below:
A) Power failure display
LED in red:
1. Power cut off
2. Output failure
3. Power grid fault
4. DC low- voltage display(protection)
5. DC over-voltage display(protection)
6. Over temperature display(protection)
B) Power adjust display
1.LED in green, but flashing, it means power is in adjusting condition.
2.LED in green and steady, it means the power is locked, and the inverter works.
System recommend :
Residential / Business systems and power plants rooftops, grounds,hills and anywhere in the sun with micro inverters, Outdoor type design IP65, mounting on the brackets saving more money,Reduced design costs & Lower installation cost of energy;
Applications:
The solar power system is to make electricity for TV,Washing machine, Refrightor, Microwave oven,Lights, Air conditioners etc., and the extra solar power electric will be automatically uploaded to the utility grid with allowance paid by local gorvernment if the policy suppots.
models | WVD-260W-230V/50Hz |
Recommend use solar panels | 300Wpv |
DC MAX input current | 20A |
AC MAX output power | 260Watt |
DC MAX Open-circuit input-voltage | 100VDC |
DC input voltage range | 22~50VDC |
MAX output power factor | 0.99 |
DC input Reverse voltage protection | FUSE |
AC output voltage range | 230V versions 190~260VAC |
AC frequency range | 48~63Hz |
Output current total harmonic distortion | THDIAC<5% |
AC Phase | <0.5% |
Islanding protection | VAC;f AC |
Output short circuit protection | Current-limiting |
Show | LED mode power instruction voltage instruction |
Communication way | 60KHz modulation,power line carrier-current communication |
Standby Power | <1W |
Night Power | <1W |
Ambient temperature range | -25 ~60 |
Humidity | 0~100%(Indoor Type Design) |
Waterproof | IP65 |
Electromagnetic Compatibility | EN50081.part1 EN50082.part1 |
Power System Disturbance | EN61000-3-2 EN62109 |
Network test | DIN VDE 1026 UL1741 |
Certificate | CE |
Net weight | 0.66kg | |
Gross weight | 0.78kg | |
Size (L x W x H) | 215×78×50mm | |
Package (L x W x H) | Inner box:31x12x8.5CM | Big box:54x33x51CM |
Installation | Back of solar panel | |
Notice: When you order, please comform SOLAR grid tie inverter's voltage and frequency.
If not specify, we will send the solar inverter as same as in the title.
Return:
1.Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received.
2.Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.
3.Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.
4.If the item is found non-defective, the item will be sent back to the buyer at buyer?s expense. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and/or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned in.
Kind Note:
Don't leave Negative feedback without asking us for help. Please contact us first if you have any problem.
We strive to answer all messages as quickly as possible.
Thank you in advance for your patience.
