Comparing with the conventional die casting machine, Our automatic rotor die casting machine has following features.
a. labor cost saving, only one operator required, the alumium scrap automatic recycle.
b. safe, it is very easy for operator to run the machine, operator only need to press "start" button, no need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury.
c. Healthy, our machine doesn't need asbestine cup to keep the temperature and demould
d. Power saving, and tooling cost is much less and fast tooling changeover.
etc
Machine main function and characteristic
Automatic get aluminium melt liquid, automatic loading and unloading the rotor.
Rotor loading: automatic pneumatic circularly pick up.
Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.
Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.
Automatic feed mold releasing agent, the feeding time and times can be set.
There is water cooling channel, helpful for reducing the mold temperature effectively.
Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.
Machine will alarm and stop working if out of material.
Failure will be automatic displayed and machine will alarm.
One person can take care of more than one machine.
Apart from the rotor die casting machine, we supply full range machines for stator and rotor manufacturing, such as stator coil winding machine, coil inserting machine, rotor assembly line, rotor turning machine, ect.
We directly and indirectly supply our machines to more than 40 countries, We sincerely wish there is a chance to be of service, make your work easier and reduce your cost!
Technical Parameters
| NO. | Item | Unit | 80TTechnical Parameters |
| 1,Main cylinder: | |||
| 1 | main cylinder mold lock force | KN | 500 |
| 2 | main cylinder mold lock travel | mm | 300 |
| 2,Injecting cylinder: | |||
| 1 | Injecting cyliner travel | mm | 150 |
| 2 | Injecting cylinder injecting force | KN | 300 |
| 3 | Injecting force(Min-Max) | KN | 70-300 |
| 4 | capacity | L | 20 |
| 5 | aluminum depot OD(Max) | mm | 75-90 |
| 6 | punching head OD(Max) | mm | 75-90 |
| 7 | aluminum depot capacity(Max) | KG | 1.5 |
| 8 | Injection punching head travel distance | mm | 55 |
| 9 | cycle time | S | 15-20 |
| 10 | Rotor OD | mm | MAX85 |
| 11 | Rotor stack height | mm | MAX70 |
| 3,Motor and pump: | |||
| 1 | Pump motor power | KW | 7.5 |
| 2 | Divider motor powder | KW | 0.75 |
| 3 | Oil pump (plunger pump) | L | 40Y |
| 4,Machine dimesion: | |||
| 1 | Main frame(L*W*G) | mm | 1800*1800 *2500 |
| 2 | assembly of oil tank and electric appliance(L*W*G) | mm | 1500*1000 *900 |
| 3 | turntable OD | mm | 1000 |
| 5,Cooling pump specification: | |||
| 1 | Submersible pump power | KW | 1.5 |
| 2 | Submersible pump rate of flow | M3/H | 5 |
| 3 | Submersible pump water pressure | MPa | 0.4 |
Remark: the max pressure of this machine is 25Mpa Submersible pump power : 220/380V Optional | |||
