Medium Wave Quartz Heat Lamps
Infrared heaters are commonly used in infrared modules (or emitter banks) combining several heaters to achieve larger heated areas.
Infrared heaters are usually classified by the wavelength they emit:
Medium-wave infrared heaters operate at filament temperatures of around 1000 °C. They reach maximum power densities of up to 60 kW/m2 (medium-wave).
The absorption spectrum for water has its peak at around 3000 nm. This means that emission from medium-wave or carbon infrared heaters is much better absorbed by water and water-based coatings than NIR or short-wave infrared radiation.
Twin Tube IR Heater
Available in standard and custom configurations:
Standards:
· Short-Wave: 200 Watts/linear in.
· Fast-Response Medium-Wave: 120 Watts/linear in.
· Carbon-based Medium-Wave: 200 Watts/linear in.
· Meduim-Wave: 50 Watts/linear in.
· Heated Length measured in whole inches
· Voltages: 120VAC, 240VAC, 480VAC
· Available with straight wire leads, quick-disconnect sockets and 90 degree leads
· Multiple coatings available: Gold, Ceramic and Ruby
Twin Tube Medium Wave Infrared Heaters
· Operating temperature 900° C
· Using Ni-Cr or Fe-Cr-A1 resistance wire as filaments
· Response time around 1 minute
· IR wavelength between 2-4 M
· Average working life up to 20000 hours
· Gold or ceramic coating at rear side as a reflectors
· Dimensions 11 x 23mm and 15 x 33mm
· Max. overall length up to 6000mm
Various Designs Of Filament
Twin Tube IR Lamps Specifications List
The IR Heater Range | Format | Heated Length | Total Length | Max. Output | |
Short Wave IR Heater | Halogen NIR | 10/11/12 dia. | 60-1000 | 110-1100 | 9000 |
Single-tube IR | 13/15dia. | 60-1200/1400 | 110-1300/1500 | 7500 | |
Twin-tube IR | 23x11 | 80-3000 | 200-3150 | 14,000 | |
Twin-tube IR | 33x15 | 80-3800 | 200-4050 | 16,000 | |
Medium Wave IR Heater | Single tube | 15/18dia | 80-1400/1700 | 150-1500/1800 | 6,750 |
Twin-tube IR | 18x8 | 80-1500 | 100-1600 | 2500 | |
Twin-tube IR | 23x11 | 100-2000 | 120-2200 | 4500 | |
Twin-tube IR | 33x15 | 500-5800 | 350-6000 | 12,000 | |
Carbon IR Heater | Round tube | 12/15/18 dia. | 120-1000/1680 | 130-1200/1750 | 7,200 |
Twin-tube IR | 23x11 | 80-2500 | 200-2650 | 8,000 | |
Twin tube | 33 x 15 | 120-3000 | 130-3130 | 10,500 | |
Fast Medium wave IR Heater | Single tube | 13/15dia. | 60-1200/1400 | 110-1300/1500 | 6,200 |
Twin-tube IR | 33x15 | 400-3000 | 600-3150 | 12,000 | |
Why Reflector / Coating
Industrial infrared heaters sometimes use a gold coating on the quartz tube that reflects the infrared radiation and directs it towards the product to be heated. Consequently, the infrared radiation impinging on the product is virtually doubled. Gold is used because of its oxidation resistance and very high IR reflectivity of approximately 95%, while ceramic white reflector can stand a higher working temp than gold and last a longer time.
FEATURES & BENEFITS of IR Heater Lamps
· Highly Efficient Heat Source
Over 85% of the input energy is converted into infrared energy.
· Ease of Control
As opposed to combustion heat energy, our light source based energy is easier to control and manipulate by use of lenses and reflectors.
· Compact and Clean Energy
A non-polluting heat source from a light weight and compact footprint enables flexible design possibilities.
· Instant On/Off
Due to the ability to reach maximum output upon ignition, a sophisticated heating programming can be applied.
· Long Life and Consistent Output
By utilizing the halogen cycle, QUICKLY's lamps are designed up to 5000 hrs with almost no loss in infrared output.
· Flexible Production Capability
QUICKLY supports customer specified custom design and OEM support.
Mounting Clamps for Infrared Heaters
Our Service
Custom designs
Elements can be designed to your specifications.
Need prototypes or samples?
We'll be glad to provide them for you and in some cases for free.
Do you have special end requirements?
We can accommodate your needs,in this case, we will have a requirement of min order quantity 100pcs at least.
Have an unusual design?
Send us a drawing, sketch, or sample and we'll be happy to quote it.
We specialize in small runs and custom designs, but can be highly competitive on large orders as well.
Engineering consulting
Not sure if quartz is right for your application? Contact me and we'll help you make the right choice. We can also assist you in picking the right infrared characteristics for your specific application. Please note, there are thousands of possible applications for quartz infrared tubes and numerous factors affecting which design works best. There is a limit to what we can help with, but we will try our hardest!
About Our Company
Hefei Quickly Electric Co.,ltd is a manufacturer of high quality Quartz electric heating elements. We proudly manufacture every elements we sell. Every element is manufactured from high quality materials sourced from both domestic and foreign suppliers. We make the finest quality elements in the market.
FAQ
1. What kind of IR lamp you manufacture
Short Wave Infrared Heater Lamps
Medium Wave Infrared Heater Lamps
Carbon Medium Wave Infrared Heater Lamps
Fast Medium Wave Infrared Heater Lamps
All of our product are customized according to your required diameter, length, power,voltage, reflector, shape...
2. What information i need to confirm before sending inquiry
Input Voltage, Wattage, Overall Length ( including ceramic base), Heated Length, Tube Diameter, Reflector Type, Lead wire length, Ceramic base type, Application, Quantity
3. How does your factory do quality control
" quality is priority", we always and keep paying more attention to QC from the material purchasing to the lamps' packing. Our product have gained CE, ROHS, ISO9001.
4. How you pack the lamps ?
5. How To make the shipping and payment?
