Plasma Consumables Nozzle 420169 65A For Hypertherm PowerMax125 Plasma Machine
We can offer you all plasma consumables for hyptertherm, Kjellberg, Esab, Koike, Komatsu, Thermadyne, such as: electrode, nozzle, shield, swirl ring, inner cap, retaining cap, water tube, torch body and so on.
Machine | HEC NO. | Ref NO. | Description |
PowerMAX125 | H71997 | 220997 | Swirl Ring 45/65/125Amp |
H71159 | 420159 | Swirl Ring 45Amp FineCut | |
H01971 | 220971 | Electrode 45/65/85/105/125Amp | |
H11158 | 420158 | Nozzle 45Amp | |
H11169 | 420169 | Nozzle 65Amp | |
H11975 | 220975 | Nozzle 125Amp | |
H11151 | 420151 | Nozzle 45Amp FineCut | |
H11001 | 420001 | Nozzle 30-125A gouging | |
H41977 | 220977 | Retaining Cap 45/65/125Amp | |
H41156 | 420156 | Retaining Cap 45/65/125A mechanized, ohmic | |
H21168 | 420168 | Shield 45/65Amp mechanized | |
H21172 | 420172 | Shield 45/65A drag-cutting | |
H21976 | 220976 | Shield 125Amp mechanized | |
H21000 | 420000 | Shield 125A drag-cutting | |
H21152 | 420152 | Shield 45A FineCut | |
H21112 | 420112 | Shieldg 30-125A gouging |
Technical Support:
Plasma cutting technology
1, the use of high quality of consumption
No high-quality parts of the high quality of cutting, parts must be made of high quality materials. Dimensions and tolerances are critical. If the machining is correct, the workpiece surface should be smooth without cracks and burr. The improvement of cutting quality usually starts with a new set of consumable parts.
2, select the appropriate consumption
Most plasma cutting machines adopt different consumable parts according to the cutting current and the use of gas. Check your operation manual to make sure you use The right consumption. Which the choice of the nozzle on the cutting quality of the greatest impact. In order to improve the cutting speed you want to allow the torch Perhaps the largest nozzle and the highest current; you may want to use the smallest nozzle and the lowest current to get the best cutting quality. Narrow slot cutting surface quality.
3, the correct assembly of the torch
Careful installation to ensure parts cutting position is accurate, close coordination between parts and parts. The correct installation of the torch to ensure good contact conductive parts and suitable airflow and cooling system by cutting torch. When installing the parts on a clean cloth to prevent dust or metal cutting torch at the end of the pollution. Use the right amount of O - ring lubricant - just polish.
