10,000 Hours Life Electric Instant Heating Element 2KW Heating Tube
to Heat Water Flow inside Tube
Descriptiom
Traditional Electric Instant Water Heating Tube Element are immersed into water. Water tank is required and it takes time to heat the whole tank water.
Thick Film Heating Element can heat water flow directly inside tube, you can get boiling water in 3 seconds, 480-600ml boiling water (95℃) in 1 minute (2.2KW or 3KW).
Thick FIlm Electric Instant Water Heating Tube is advanced in larger heating area (Tubular Structure), higher in power density(40W/cm²), faster temperature response (up to 150℃/S), longer life time (>10,000 hours) and higher in thermal transfer(96%).
As the water flow instant heating elements in industry, Thick Film Heating Tube is in tubular structure. It can heat water flow inside tube, by the heating circuit sintered between 5 isolation layers on tube surface.
It connects with wire leads by spot-weld to silver conductor on the surface.
For applications where space is limited, this simple profile heating element offers high thermal power density and fast response times to heat up or cool down (due to low thermal mass).
Thick Film Heating Elements are widely applied in industrial water flow instant heating, electric instant water dispenser, electric water instant heating purifier, electric instant drinking water geyser, instant coffee maker, water heater under sink, faucet, instant shower heater, etc.
It's advanced in power density(60W/cm²), thermal transfer (≥96%) and temperature ramp-up rate(80℃/S).
You can get boiling water in 3 seconds, in the rate 480ml per minutes (2,200w).
Customer design service is available.
Specification
| Dimension | Φ30mm*110mm(length) | Heat Density | >40W/cm² |
| Ramp-Up Rate | 80℃/s | Thermal Efficiency | >96% |
| Heating Power | 2,200W | Service Life | >10,000 hours |
| Rated Voltage | 220v | Certificate | CQC, RoHS |
| Dielectric Strength | 1,500V/5mA/60s | Power Deviation | -10% - +5% |
| Leakage Current | ≤0.25mA | Insulation Resistance | ≥200MΩ |
| Type | Thick Film Water Flow Instant Water Heating Tube | Application | to replace iron immersion electric water heating element |
| Shield Thermistor | PTC | Grounding Type | Spot-Weld |
Related Products
Available Thick Film Heating Tube Element diameter are 18mm, 20mm, 30mm, 35mm, 40mm and 50mm
Power watts are 2.2kw, 3kw, 3.5kw, 3.8kw, 4kw, 5.5kw and 6kw
Mainly applied in Water Flow Instant Heating. Due to its long life time and higher thermal transfer, it's ideal to replace traditional immersion water heating elements.
Applications
The most compact instant type heating element is the ideal heating element for novel and fashionable home appliances such as Water Dispenser, Water Purifier, Coffee Maker, Milk Machine, etc.
Some of our Thick Film Electric Heating Tubes are individual customer solutions which are designed to match our customers' individual and specific requirements. During the development and application stages we work closely together with our customers in a partnership based on trust and mutual confidence.
About Us
Jieda locates in Xinxiang's Hi-Tech Development Park, which is 650km away from Qingdao. Jieda was founded in 2010, is a high-tech manufacturer that specializes in design, research, produce and sales rare-earth metal thick film electric heating tubes/elements.
What is Jieda advanced in?
1. More than 5 years experiences in thick film electric heating tubes.
2. Fully mastery of thick film tube surface screen printing and sintering.
3. Main Process Flow in 10000+ Grade Air Purification Workshop.
4. First manufacturer to mass produce Thick Film Electric Heating Tube/Element in China
5. Available various Solutions for fluid heating, especially for Instant Water Heating Home Appliances, House Floor Heating and Industrial water flow heating.
6. Monthly production capacity is up to 300,000 pcs.
What is Thick Film Heating Tube/Element advanced in?
1. The tubular structure makes it possible to instant heat water flow inside tube, by the Electric Heating Circuit printed and sintered on the tube surface.
2. It can work more than 10,000 hours, in case of no DRY HEATING.
3. The thermal transfer rate up to 96%.
4. Power Density is up to 60w/cm²
5. Temperature Ramp-Up Rate 150℃/S.
6. Boiling water(95℃) is available in 3 seconds around.
7. Simple & compact profile brings more possibility in new products research and design.
Those thick film heating tubes/elements are widely applied in Instant Water Boiling, Instant Water Heater, Water Dispensers, Coffee Makers, Instant Electric Heating Faucets, Steam Generator, Air-Flow Heater, Floor Heating, Industrial Water Flow Heating, etc.
It can successfully replace the Traditional Electric Heating Tubes/Elements, change their structures and performance completely, which can reduce energy consumption, increase energy utilization and save space.
OEM & ODM Service
Heating Power, Voltage, Stainless Steel Tube Dimension, Raw Materials and other special requirements can be customized.
Packaging & Delivery
------ Packed in Carton Box, placed on Wooden Pallet.
------ By Sea, FOB Tianjin Port, 40HQ, 40 GP, 20 GP, LCL, or Mix with Others Factory, no Space Waste, Save Freight Cost!
------ By Air, FedEx, DHL, TNT, UPS...
------ Support Global Dilivery!
FAQ
| FAQ |
Q: What's Thick Film Heating Element? A: -Thick Film Heater is a new technical art which is use screen printing technology and new thick film material. It is printed with isolation dielectric, heating element and glass prevent on a substrate that is made by stainless steel, amd through drying firing process with 800°C. Thick Film Heater has become a new type of heater. |
Q: What's the advantages of Jieda Thick Film Heating Element? to heat continuous water flow without water tank. 60W/CM² POWER DENSITY >80℃/S TEMPERATURE RANP UP |
Q: What's the lifespan of Thick Film Heating Tube / Thick Film Heating Element? |
Q: What's the inlet and outlet diameter? Thick Film Heating Element : Available with Ø10mm, Ø16mm and G1/2 OD20.9mm |
Q: Can I DIY it for personal use by myself? A: Our Products are mainly used as heating spare parts for water heaters in mass production, not recommended for Personal DIY. |
Q: Can the Thick Film be applied to Copper Pipe or Aluminum Pipe? A: It can not be applied on Copper pipe, but can work on Aluminum pipe. |
Q: How to get the suitable model for our application? and other special requirements, to recommend the suitable Thick Film Heating Elements |
Q: What's the operation attentions? 2. Please install it vertically, make sure water flow direction from bottom to top, to prevent DRY HEATING in partial area of heating tube. 3. Set the minimum flow rate according to tubes' power watts, ensure smooth flowing of water, to prevent vaporizing and dry heating 4. Make sure reliablility grounding. |
