rear axle bush tools
Introduction:
Remove/install Fiesta IV rear axle mounting bushes. Can be used in situ - no need to remove trailing link assembly from vehicle. Supplied in carry-case.
Applications: Ford; Fiesta IV (1996 onwards), Ka
Operation:
DO NOT USE AN IMPACT WRENCH WITH THIS TOOL.
1. Before working under the vehicle ensure that it is adequately
supported on axle stands.
2. Thoroughly lubricate the screw rod threads each time the tool is used.
3. Remove the rear wheels to gain access to the bush housings at
the top of each trailing arm.
4. Thoroughly apply penetrating oil to each bush to aid extraction from
the bush housing.
5. To extract the old bush, assemble the tool onto the bush as shown
in Fig.2. Ensure that the threaded rod 1 is well lubricated prior to
assembly. Hold the retention nut 2 with a 24mm ring spanner.
Using a ratchet wrench with a 24mm deep socket turn the nut on
the force nut assembly 6 clockwise to drive the bush out of its
housing.
6. To insert the new bush, assemble the tool and bush onto the bush
housing as shown in Fig.3. Ensure that the threaded rod 1 is well
lubricated prior to assembly. Hold the retention nut 2 with a 24mm
ring spanner. Using a ratchet wrench with a 24mm deep socket turn
the nut on the force nut assembly 6 clockwise to drive the bush into
the housing.
Packing details:
QTY(SET) | G.W.(KGS) | N.W.(KGS) | MEAS(CM) |
5 | 15 | 14 | 46*27*17 |
