5" x 15000 psi Hydraulic Circulating Valve for drill stem testing operation
DST Hydraulic Circulating Valve 5"x 15000psi
Introduction of 5"x15000psi Hydraulic circulating valve
The Hydraulic Circulating Valve, hereafter call it as H-circulating valve, serves as a bypass around the packer or as a
circulating valve to circulate a well after testing. When run below a closed valve, the tool serves as a bypass around the
packer and helps relieve pressure buildup below the closed valve when it is stung into a production packer. When run
above a closed valve, the tool can be used as a circulating valve when the workstring is picked up.
Features and Benefits
• wireline tools through its full-opening bore
• Requires no pipe rotation to operate
Specification of the 5"x15000psi Hydraulic circulating valve
OD | 127.5mm(5") |
ID | 57mm |
Length | 2312mm(IF BxP) |
Working Pressure | 105Mpa |
Tensile Strength | 1459KN |
Internal Pressure Strength | 105Mpa |
External Pressure Strength | 139Mpa |
Torque Strength | 22KN.m |
Service | Mud,Crude Oil,Natural gas NACE MR0175,Above 175F |
Working Temperature | -29oC~204oC |
Connection Thread | 3 1/2" IF BXP 3 7/8" CAS BXP |
Hydraulic Circulating valve
ZZ TOP's Facility
ZZ TOP OIL TOOLS manufactures the drill stem testing tools and surface testing equipment as per NACE MR 0175. All the DST tools are with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.
5" x 15000 psi Hydraulic Circulating Valve for drill stem testing operation
DST Hydraulic Circulating Valve 5"x 15000psi
