.jpg)
Universal offers Mechanical Paver Finisher for paving / laying the hotmix material on the constructed surface.
The hotmix material from the truck is dumped into the paver hopper which is then conveyed to the spreading screw by chain conveyor. The left & right hand screw spreads the hotmix material equally along the paving width. The floating screed then paves this hotmix material to the desired preset thickness.
ü The paver finisher is powered by 4 cylinder diesel engine rated to develop 65 H.P. Engine is fitted with fuel injection pump, air compressor, 12 V dynamo, battery, oil pressure, water, temperature gauges, ammeter, starter button key etc.
ü The paver finisher is mounted on 2 nos. rear pneumatic tyres and 2 nos. solid sandwich rubber coated front wheels. Rear drive wheels are controlled by differential & there is power operated independent brakes for each wheel.
ü Hydraulically foldable hoppers capable to receive the premix material approx. 4 cu.m. The floor of the hopper is constructed of abrasive resistant steel plate.
ü Two nos. bar type chain conveyor moves the material from hopper to spreading screw (augers) and the volume of material moved is controlled by adjustable gates.
ü The paver is provided with left hand & right hand spreading screws (augers) capable of evenly distributing the premix material delivered by bar chain conveyor over the desired width area to be surfaced.
ü The paver finisher is equipped with fully floating hydraulically extendable screed provided with heating arrangement to enable the screed to be uniformly heated before and during operation. Screed slides over the premix material and smoothens it out in preparation for rolling and is adjustable to give a crown to the material. The screed is provided with hydraulically powered tamping device for initial material compaction while laying. The screed is raised or lowered by hydraulic jacks. Hand wheels are provided to control slope and grade while paving.
ü All the controls are grouped at the left rear of the machine and within ease reach of the operator with a comfortable, adjustable seating arrangement for the operator and a canopy is provides shed to operator protecting from sun and rain.
ü It has 4 forward speeds between 2 to 23 m/min in low and high ranges & equal reverse speeds.
.jpg)
