1)material:zinc plated steel or 304 stainless steel
2)bandwidth:31.7mm
3)thickness:1.8mm
4)finishing:cleaning and polishing
5)usage:for sliencer exhaust muffler downpipe
* Made of beefy 3/32" thick 304 Stainless Steel. This clamp is all function.
* 1-1/4" wide band.
* Hardened Grade-8 clear zinc-plated hardware included - clamps are fully assembled as shown.
* Torque to 35 foot-pounds.
* Will not distort or "crimp" exhaust connection s like U-Clamps when installed properly
* easy disassembly of exhaust pipes later-on.
* Approx. 40% stronger rotation resistance than AccuSeal Clamps when properly installed.
* Approx. 55% stronger separation resistance than AccuSeal Clamps when properly installed.
* Available in 2-1/2" & 3" sizes.
* Available for aftermarket only through Classic Chambered Exhaust at this time.
•High-strength fastener hardware with corrosive resistant coating
•Easy to assemble only one assembly torque point
•Exclusive reaction block, the reaction block provides a full 360°equal distribution of stretching forces, prohibiting pipe distortion while completing a seal around the joined exhaust components.
| size(inch) | inner diameter(mm) | bandwidth(mm) | thickness(mm) | material | finishing |
| 2.0" | 51 | 31.7 | 1.8 | galvanized steel or SUS 304 stainless steel | cleaning and polishing |
| 2.25" | 57.2 | ||||
| 2.5" | 63.5 | ||||
| 2.75" | 70 | ||||
| 3.0" | 76.2 | ||||
| 3.25" | 82.6 | ||||
| 3.5" | 88.9 | ||||
| 4.0" | 101.6 | ||||
| 4.5" | 114.3 | ||||
| 5.0" | 127 |
