FITCRN32-1 is suitable pumps:CR(N)32,45,64,90,150
This innovative range is widely used for slurry pump, pulp & paper, sludge & syrup pump.
In line with international standards, these products are manufactured using quality tested
raw material and cutting-edge techniques. Also, these products are examined properly
our quality controllers upon different parameters of quality. Our offered products are
well known in the market for featuring variegated attributes like sturdiness,
optimum quality.
Mechanical seals used for stainless steel vertical multistage centrifugal pump
Cartridge Style with Clamped Retainer
Operating Conditions:
Pressure: Up to 2.5Mpa
Speed: Up to 25m/s or 80ft/s
Temperature: -30deg C to 200deg C (Depending on materials)
Mediums: Water, oil and other low corrosion mediums
pump Part Number:
96416584
96433365
96525459
96525490
96436728
| Maximum ambient temperature | 60 °C |
| Maximum operating pressure | 16 bar |
| Max pressure at stated temp | 16 bar / 120 °C |
| Max pressure at stated temp | 16 bar / -40 °C |
| Type of connection | DIN |
Pressure: Up to 2.5Mpa
Speed: Up to 25m/s or 80ft/s
Temperature: -30deg C to 200deg C (Depending on materials)
Mediums: Water, oil and other low corrosion mediums
The unbalanced o-ring seal with tungsten carbide seal face was used with success
in abrasive liquids. It soon led to the development of seals for other CRN pumps,
including the BP DEEP WELL PUMP. cr MULTI-STAGE PUMPS, UPT SINGLE
STAGE PUMPS. LM AND LP INLINE PUMPS.
The tungsten carbide/tungsten carbide seals faces proved to be very successfull
material pairing for cold -water applications. This pairing did not turn out to be a
very cuccessfull in hot-water applications on account of very noisy operation.
SIC against SIC becomes the common material pairing for cartridge shaft seals.
This paring had an excellent abrasive resiistance and good perfomance in hot water .
It is also with cheaper price.
This 22 mm Type E Cartridge Seal fits the following OEM Part Numbers.
Pump Models: CR, CRN32, CRN45, CRN64, CRN90
FT CRN SERIES for Grundfs pump Mechanical Seal used in centrifugal pumps,mixer,compressors and other rotating equipments.
We mainly supply pump mechanical seals, auto cooling pump seals, industrial pump seals, carbon face sela and ceramic face seal, etc.
Features:
· Single seal
· Loosely inserted seal face provides self-adjusting capability
· In-house manufactured sliding parts
Advantages:
· self-adjusting to shaft misalignments deflections
· The length of the contact area of the bellows with the shaft is an optimum compromise between ease of assembly (less friction) sufficient adhesive force for torque transmission.
· the seal fulfills very specific leakage requirements.
