Descripton:
HDB Modular valve series is the latest innovation designed to meet the requirements of the mobile equipment market. Designed with the feedback from the market and with the major OEM collaboration, it has a residual pressure relief system which allows an operator to connect and disconnect the two circuit lines with residual pressure, both in the male and in the female. HDB modular valve series is equipped with ISO 16028 interchangeable flat face couplings, has a modular design for multiple port options, and allows for a wide range of coupler sizes: 1 / 2 (04), 3 / 4(08)
Applications
Skid Steer, Excavator, Mobile construction equipment
HOW TO USE
Before to couple clean the flat mating surface of quick coupling to avoid the inclusion of dirty in the circuit.
Drain the residual pressure pulling the knob out and up to drain the residual pressure of upper coupling, down to drain the residual pressure of lower coupling.
WARNING
Do not relieve pressure:
--When the attachment is not in the rest position
--During operation of the attachment ( due to danger of unexpected movement of the attachment)
Do not use the female coupling disconnected with high impulse pressure frequency.
Do not couple-uncouple with flow and/or pump pressure in the circuit. Dis / Connection only allowed with residual pressure.
Do not couple-uncouple when the temperature inside of the circuit is higher than 80 (176 ).
When the couplings are disconnected, it is suggested to use the protection caps.
It is important to limit contamination in the circuit to avoid compromising the function of the internal valves.
Body Size(in) | 1/2(04) | 3/4(08) |
Rated Pressure (PSI) | 4350 | 4350 |
Rated Flow(GPM) | 12 | 28 |
Temperature Range(std seals) | -20℃ to +120℃ | |
Standard seal material | NBR | |
Connect--Disconnect max. residual pressure: 3625(PSI).
BENEFITS
User friendly relief system allows for easy connection and disconnection with residual pressure.
It drain the residual pressure before connection and disconnection, allowing the connection without pressure and without effort in safety condition , in order to reduce injury risk .
Flat face is easy to clean, helping to reduce the inclusion of contamination to the hydraulic circuit.
Minimal fluid loss during connection / disconnection, reducing fluid loss to the environment.
Minimal air inclusion during connection / disconnection, enhancing correct function of the circuit.
Patented internal coupling's valve design creates minimal pressure drop, maintaining circuit efficiency in the system
Good resistance at impulse pressures .
Compact slim and flexible design ( it allow to use different size of couplings ) .
Safe and simple to us
TECHNICAL FEATURES AND OPTIONS
Interchangeability: equipped with ISO 16028
couplings available in different configuration and different dimensions
Couplings type: Flat face
Mechanical connection: Locking balls
Connection system: Push to connect
Disconnection system: Pulling back the sleeve of the female coupling
Connection with residual pressure: After draining the pressure with the lever
Disconnection with residual pressure: After draining the pressure with the lever
Seals: standard in NBR (Nitrile)
Anti-extrusion rings: PTFE
ISO | PARTNO. | A | B | C | D | E | F | G |
12.5 | HDB-04 | 184 | S44.45 HEX | S50.8 HEX | S25.4 HEX | Φ38 | Φ24.54 | Φ19.75 |
19 | HDB-06 | 188 | S44.45 HEX | S50.8 HEX | S25.4 HEX | Φ38 | Φ29.95 | Φ19.75 |
