Oilfield Production Sucker Rod Grade D 1 1/8"
Oil well Grad D Sucker Rod 1 /1/8" wtih T coupling
Introduction of Grade D Sucker Rod
The 1 1/8" Grade D Sucker rod is a sort tool used to a sucker rod pumping equipment. The 1 1/8" Sucker Rod connect with coupling to be a rod string, and up through polished rod connection on the pumping unit or PCP motor, down connection on the pump piston or PCP.
ZZTOP supply sucker rods as follows:Grade: C, D, K, KD, H;Size (in,): 5/8˝ (16 mm), 3/4˝ (19 mm), 7/8˝ (22 mm) , 1˝ (25 mm), 1-1/8˝ (28 mm). The pony sucker rods and conventional/slim hole couplings with various sizes are available as well.
Specification of the 1 1/8" Sucker Rod
Sucker Rod Nominal Value | Φ29(11/8") |
Rod Body Diameter | 28.58+0.25-0.51 |
Outer Diameter Of External Thread Shoulder | 57.2+0.13-0.25 |
Wrench Width | 38.1(1.500) |
Wrench Length | 41.3(1.625) |
API Rod Length | 508(20) |
Domestic Rod Length±50 | 900,1400,1900, 2400,2900,3400, |
Upset Flange Diameter | 55.6+0.13-3.17 |
AR±3.2(±0.125) | 85.7(3.375) |
CR+1.59-0.40 | 4.8(0.188) |
Mechanical of the Sucker Rod
Mechanical Properties Of Steel Sucker Rod | |||||||||||
Grade | Minimum Yield Strength(0.2% Residual Deformation) | Minimum Tensile Strength | Maximum Tensile Strength | Elongation200mm% | Reduction Of Area Z% | Surface Hardness HRC | Core Hardness HB | Fatigue Life | |||
D | 85000 | 586 | 115000 | 793 | 140000 | 965 | ≥13 | ≥50 | |||
KD | 85000 | 590 | 115000 | 795 | 140000 | 965 | ≥13 | ≥50 | |||
Inspection of the Grade D sucker rod
Oilfield Production Sucker Rod Grade D 1 1/8"
Oil well Grad D Sucker Rod 1 /1/8" wtih T coupling
