1.Product introduction
Titanium mesh is mainly used for screening and alkali environmental conditions or gas, liquid filtration and other media separation. There are three methods of plain weave, twill weave, and dense weave. Due to the difficulty in drawing titanium wire, the most delicate titanium wire drawn in China can achieve 0.05mm, the elongation of titanium wire is low, the strength is large, the elasticity is large, and the flexibility is low. This greatly limits the production of high mesh titanium mesh. The size of the titanium mesh is 1 mesh - 400 mesh.
2. Product Classification
Plain titanium mesh
It is the most common weaving method, and its main feature is the same density of warp and weft wire diameters.
Titanium dense mesh
Plain weave pure titanium dense mesh, twill weave pure titanium dense mesh performance: with stable filtration performance, fine and so on. Uses: used in aerospace, petroleum, chemical and other industries.
3. product specifications
Number of mesh: 0.2 mesh - 400 mesh
Thickness: 0.5-2 mm, width: 100-300 mm, coating thickness: 0.5-5 um.
4. Material
TA1, TA2, GR2, GR3, titanium alloy, etc.
Material surface: 1. Black (the surface contains graphite emulsion coating)
2. Bright (no graphite coating)
Standard value
| Reference standard for chemical composition | |||||||||
| Grade | Al | V | N≤ | C≤ | H≤ | Fe≤ | O≤ | Other elements (single) | Other elements (sum) |
| TA1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | 0.1 | 0.40 | ||
| TA2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | 0.1 | 0.40 | ||
| TC4 | 5.5-6.75 | 3.5-4.5 | 0.05 | 0.08 | 0.015 | 0.30 | 0.20 | 0.1 | 0.40 |
| Reference standard for mechanical properties | ||||
| Grade | The mechanical properties at room temperature are not less than | |||
| Tensile strength | Yield strength | Elongation | Section shrinkage rate | |
| TA1 | 240 MPa | 170 MPa | 25% | 30% |
| TA2 | 345 MPa | 275 MPa | 20% | 30% |
| TC4 | 895 MPa | 825 MPa | 10% | 20% |
5. factory show
6.other products
