Wellhead Tubing Spool With Tubing Hanger
Bottom Flange 11" X 3000 # Top Flange 7-1 / 16" X 3000
API 6A Tubing Head Tubing Spool and Tubing Hanger for Wellhead
Overview of the Tubing Spool
The tubing spool designed and manufactured according API6A specification, is the part of the oilfield
wellhead equipment. With the tubing hanger, the tubing spool is used as the tubing head in well
control system, the tubing head is connected to the upper casing head with the christmas tree and
applied for sealing the annular space the string and oil-layer casing.
Specification of the tubing spool with the tubing hanger
| I | TUBING SPOOL |
| 1 | BOTTOM FLANGE 11" X 3000 # BY TOP FLANGE 7-1/16" X 3000# AND BOTTOM MUST BE PREPARED TO BE APPLICABLE EITHER FOR T CASING OR 5 1/2M CASING.TUBING SPOOL IS TO BE FURNISHED WITH 2 STUDED SIDE OUTLETS FOR 2-l/16MX 3000 PSI FLANGE TYPE GATE VALVES. TOP FLANGE TO BE FURNISHED WITH TIE-DOWN SCREWS FOR TUBING HANGER CONE. BOTTOM PREPARED WITH DOUBLE " P" SEALS FOR 5 1/2M CASING INCLUDING ALLEN WRENCH AND PLASTIC PACKING. |
| 2 | TUBING HANGER FOR ABOVE SPOOL WITH 2-7/8" EUE, 8 TPI ROUND API TOP AND BOTTOM |
| 3 | RING GASKET, R-53 FOR 11" X 3000# WP FLANGE ( BOTTOM ) |
| 4 | STUD BOLT WITH TWO NUTS 1 3/8" DIA X 10 3/4" LONG FOR BOTTOM FLANGE |
| 5 | R-45 RING JOINT GASKET |
| 6 | STUD BOLT WITH TWO NUTS 1 1/8" DIA X 8 1/2" LONG FOR TOP FLANGE |
| 7 | STUD BOLT WITH ONE NUT 7/8" DIA X 6 1/4" LONG |
| 8 | 2 1/16" X 3000# FLANGE TYPE GATE VALVE, FULL ROUND OPENING, C/W HAND WHEELS |
| 9 | R-24 RING GASKET FOR 2 1/16" X 3000# EXPANDING VALVES |
| 10 | STUD BOLT WITH TWO NUTS 7/8" DIA X 6 1/4" LONG |
| 11 | COMPANION FLANGE 2 1/16" X 3000 # WP X 2" LINE PIPE THREAD |
| 12 | 2" LINE PIPE THREADED SOLID BULL PLUG(3000#) |
| 13 | 2" LINE PIPE THREADED BULL PLUG,TAPPED WITH 1/4" NPT HOLE (3000#) |
| 14 | 2 3/8" X 2 7/8" EUE CHANGE NIPPLE (ID MUST BE LARGE ENOUGH SO THAT 2 3/8" SWAB CUP (OD = 1.92") MAY PASS THROUGH INSIDE2 3/8" X 2 7/8" CHANGE NIPPLE (3000#) |
JC Petroleum Equipment Factory manufactures and supplier the various wellhead manifold and related parts to meet different requirement in oilfield service operation. The wellhead manifolds are conformed with API 6A and API16C specification, and applied for high pressure and high temperature working condition. The wellhead manifold include choke and kill manifold, fracturing manifold, testing manifold, drilling floor manifold etc. And we can design the wellhead manifold as per the customers' requirements
