decking floor making machine
floor decking roll forming machine, decking floor roll forming machine
Product Application:
The product produced by these series machine is used for floor decking in building. We need't dismantle the mould after pouring concrete, so we can finish the project as soon as we can. Normally, the raw material for decking floor is glazed galvanized sheet, we neednt decorate the ceiling again, due to it is beautiful enough. This series product is suitable for streel structure factory and public big building.
Technical parameter
Items | Specifications | |
Material of coil | Material Width | 1250mm |
Material Thickness | 0.4-0.7mm | |
Uncoiler | 5 tons manual | |
Forming system | Rolling Speed | 6-15m/min |
Roller Stations | 14 stations | |
Roller Material | 45# steel, Electroplating 0.02-0.05mm | |
Material of shaft | 45 steel | |
Shaft DIA | D76mm | |
Maim Motor Power | 15kw | |
Hydraulic cutting Power | 5.5kw | |
Cutting system | Material Of Cutting | CR12Mov |
Tolerance | +-1.5mm | |
Electrical control system | Electric Source | 380V, 50HZ,3 phase |
Control System | PLC (Panasonic) | |
Way Of Drive | 1.5inch single chain |
Rollers
In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.
Roller chrome coated thickness: 0.05 mm.
