I. Technical Specification of FDV-3KW Vertical Axis Wind Turbine
| System | |
| Type: Single Phase | On/Off-Grid System Vertical Axis |
| Axis Type: | Maglev Axis |
| Rated wind speed | 7.5m/s |
| Wind energy ratio | 45% |
| Diameter of Wind Rotor | 2m |
| Design Standard | CE EN61400-2/EN60204-1 |
| Design Service Life | 25 Years |
| Performance Parameter | |
| Rated Electrical Power | 1KW 7.5m/s |
| Cut-in wind speed | 3m/s |
| Cut-out wind speed | 25m/s |
| Shut-down (high wind) | 26m/s |
| Security wind speed | 50m/s |
| Annual Power Output | 1260khw(Minimum Output) |
| 3380kwh(Maximum Output) | |
| Blades Number of blades/Length | 5PCS/ 2.4m vertical Height |
| Material/ Weight | Epoxy/Glass Fibre |
| Generator | |
| Generator Type / Frequency | 3phase PMG/50Hz |
| Voltage Output | 3phase 0-380VAC |
| Rated Rotation Speed | 150RPM |
| Maximum power output | 1.52KW@14-16m/s |
| Insulation | Class F |
| Off-Grid Charge Controller | |
| Input voltage from generator | 0-380VAC/50Hz |
| Charge voltage /Time | 36/48VDC/ about 12 hours |
| Battery configuration | 4PCS -12V-150/200AH |
| Off-Grid Inverter | Pure Sine Wave Inverter (1KW) |
| Input voltage | 36VDC or 48VDC |
| Output voltage | 220V-240VAC /50Hz(Single Phase) |
| Tower | |
| Free Standing Tower | 8m / 2 Sections (Each Section 4M) |
| Tower Surface treatment | Hot DIP galvanized |
| Other optional Height | 10m, 12m |
