CB-DWT(2X / 3X / 4X) HEAT-SHRINKABLE TUBINGS
WITH MELTABLE LINEER
CB-DWT is adhesive lined, flexible, halogen free and flame-retardant polyolefin Heat-shrinkable Dual wall tubing, which can meet ROHS compliant and Sony environment substance. This tubing has good mechanical strength which can be protect from fluids, moisture and corrosion, they are used in a wide variety of electrical applications, including back end connector sealing, breakouts, and connector-to-cable transitions. High expansion ratio makes it possible to repair most damaged cable jackets without removing connectors.
CB-DWT (2X/3X/4X) is 125ºC, shrink ratio 2:1/3:1/4:1,600V,equal Raychem TAT125/DWP-125/HTAT.Certificate: UL224, CUL, F-mark, Sony Green Partner.
Specifications
Item | Specifications | |
Shrink temperature | 110℃ | |
Operating temperature range | -55℃~125℃ | |
Tensile strength | =>10.4MPa | |
Elongation at break | =>200% | |
Radial shrinking ratio | =>50% | |
Longitudinal change | =<10% | |
Aging in circulating-air oven | 158.0℃±1.0℃,168hrs | |
After aging | Tensilestrength | =>7.3%MPa |
Elongationat break | =>100% | |
Dielectric strength at 1 min,AC2500V | No breakdown | |
Volumeresistivity | =>1014 OM.cm | |
Flammability | VW-1 | |
Water absorption | < 0.4% | |
Fluid resistance | Excellent | |
Concentricity | No corrosion | |
Softeningpoint of meltable liner | 120℃±5℃ | |
Peelstrength of meltable liner | =>80N/25mm |
Size
Size (inch) | Assupplied | Afterrecovery | ||||
MinID (mm) | NominalWall (mm) | MinID (mm) | TotalWall (mm) | NominalWall (mm) | ||
CYG-DWT(2X) | ||||||
3/64 | 1.20 | 0.30 | 0.60 | 0.45±0.12 | 0.20 | |
1/6 | 1.60 | 0.30 | 0.80 | 0.45±0.12 | 0.20 | |
3/32 | 2.40 | 0.35 | 1.2 | 0.55±0.12 | 0.30 | |
1/8 | 3.20 | 0.40 | 1.6 | 0.60±0.15 | 0.30 | |
3/16 | 4.80 | 0.40 | 2.4 | 0.75±0.15 | 0.35 | |
1/4 | 6.40 | 0.40 | 3.2 | 0.75±0.15 | 0.35 | |
3/8 | 9.50 | 0.40 | 4.8 | 0.80±0.20 | 0.35 | |
1/2 | 12.7 | 0.40 | 6.4 | 0.80±0.20 | 0.35 | |
3/4 | 19.1 | 0.50 | 9.5 | 0.95±0.28 | 0.40 | |
1 | 25.4 | 0.50 | 12.7 | 1.15±0.28 | 0.45 | |
1-1/2 | 38.1 | 0.65 | 19.1 | 1.25±0.41 | 0.45 | |
2 | 50.8 | 0.73 | 25.4 | 1.40±0.41 | 0.50 | |
CYG-DWT(3X) | ||||||
1/8 | 3.00 | 0.57 | 1.00 | 0.85±0.28 | 0.35 | |
3/16 | 4.80 | 0.57 | 1.50 | 1.05±0.28 | 0.45 | |
1/4 | 6.00 | 0.57 | 2.00 | 1.10±0.28 | 0.45 | |
3/8 | 9.00 | 0.64 | 3.00 | 1.45±0.28 | 0.45 | |
1/2 | 12.0 | 0.80 | 4.00 | 1.50±0.38 | 0.45 | |
3/4 | 19.0 | 0.93 | 6.00 | 2.00±0.55 | 0.65 | |
1 | 24 | 1.00 | 8.00 | 2.00±0.55 | 0.65 | |
1-1/4 | 31.8 | 1.00 | 11.0 | 2.20±0.55 | 0.65 | |
1-1/2 | 38.1 | 1.00 | 13.0 | 2.54±0.55 | 1.00 | |
2 | 50.0 | 1.00 | 17.0 | 2.50±0.55 | 1.00 | |
CYG-DWT(4X) | ||||||
1/4 | 4.00 | --- | 1.0 | 1.10±0.30 | 0.50 | |
8/2 | 8.00 | --- | 2.0 | 1.10±0.30 | 0.50 | |
12/3 | 12.0 | --- | 3.0 | 1.40±0.30 | 0.61 | |
16/4 | 16.0 | --- | 4.0 | 1.80±0.30 | 0.76 | |
24/6 | 24.0 | --- | 6.0 | 2.25±0.55 | 0.76 | |
32/8 | 32.0 | --- | 8.0 | 2.54±0.55 | 1.02 | |
52/13 | 52.0 | --- | 13.0 | 2.60±0.55 | 1.02 | |