carbon fiber tube for Rotor protection sleeve of permanent magnet synchronous & asynchronous motor
This products is suit for rotor protection sleeve of permanent magnet synchronous & asynchronous motor. It size 56.8*55.6*100mm. Bearing temperature 180℃, rotor speed 20,000r/min. When the rotor's speed is lower, For example 2000 r/min, or 3000r/min,8000 r/ min etc, choose stainless steel protection sleeve is good idea. Because it is lower cost. If the rotor's speed is higher, for example 20,000 r/min, 50,000 r/min, Please choose carbon fiber protection sleeve for the rotor. Stainless steel rotor protection sleeve can't match so higher speed.
The max speed for carbon fiber protection sleeve is 100,000 r/min.
| Size | Material | Rotor speed | Working temperature |
| 56.8*55.6*100mm | T700 carbon fiber | 20,000 r/min | 180 degree |
Carbon fiber tube for rotor protction's Advantage:
1. Can bearing high temperature-- 180 degree.
2. Conductive heat quickly
3. Non-Conductive magnet
4. Good dynamic balancing when high-speed
5. permanent magnet synchronous & asynchronous Motor rotor speed 60,000 r/min, The centrifugal deformation 0.2 mm
It suit for the motor speed > 10,000 r/min
There are two way to produce the carbon fiber rotor cover:
1.Produce carbon fiber tube first ;Then Put the present carbon fiber tube cover the outside of rotor
2.Produce the carbon fiber cover directly outside of the rotor
