Automatic self cleaning brush filter
Introduction
Automatic brushaway filter is composed of the drive mechanism, the control circuit (including the pressure switch), filter components, cleaning device, connecting flanges and other major component parts.It cleans sewage by the drive motor and the electric valve automatically, the operation mode is automatic operation (option:manual operation), with timing control or pressure difference control. Its automated part is controlled by reliablePLC programmable controller.
Water enters into the filter, the mechanical impurities are intercepted.When the impurities accumulate for a period, reaches 0.05MPa, then the differential pressure switch will send signal, while the PLC command is issued, transmission motor starts, the drain valve opens, the impurities deposited on the filter is brushed away,and drain out.The whole process is without personnel, without downtime. Besides, the device also has the function of timing and manual cleaning to ensure that the outlet water is safe under any circumstances.
Raw water enters the inside of the screen-cylinder from the filter's Inlet and flows through the screen to the filter's Outlet. The dirt particles are trapped on the inner screen surface and formulate a "filtration cake" that causes a differential pressure across the screen.
A pressure differential switch senses the pressure differential and when it reaches the pre-set value, the cleaning process begins.
During the self cleaning process, filtered process water continues to flow. The Drain Valve opens and theMotor rotates the stainless steel brush which sweeps the inner surface of the cylindrical screen. The particles trapped on the screen are dislodged by the brushes and flushed out the drain valve.
The whole process takes 20-30 seconds.
During the whole process water supply is uninterrupted.
Technical Parameters
1. Treatment effectiveness
Filter precision: customized
Filtration efficiency: 99%;
Initial pressure loss: ≤0.015Mpa.
2. Inlet Water Quality
Working pressure: 1.0 / 1.6 / 2.5Mpa;
System pressure: ≥0.4Mpa;
Working temperature: 1 ℃ -90 ℃;
Working environment temperature: 1 ℃ -50 ℃;
Relative Humidity:<95%.
3. Operating parameters
Mean time between failures:> 60,000 hours;
Design life: 30years for shell; 5 years for electrical parts.
Power: 0.2-0.6kw
Operating voltage: 220V ~ 380V ± 10%, 3-phase, 50 / 60Hz;
Safety insulation voltage: 5000V.
Product Parameter
Our company can manufacture the filter according to the user's requirements of size,material (eg.carbon steel, stainless steel), color and other special requirements.
Mode | DN | Flow | Dimensions | ||||||||||
Filtration Area | Weight | Number of motors | D | H | H1 | H2 | H3 | L1 | L2 | ||||
inch | mm | m³/h | cm2 | Kg | mm | ||||||||
SHL-50 | 2 | 50 | 40 | 2100 | 112 | 1 | 377 | 500 | 875 | 1088 | 1350 | 373 | 350 |
SHL-100 | 4 | 100 | 80 | 3530 | 175 | 1 | 377 | 500 | 875 | 1088 | 1350 | 373 | 350 |
SHL-150 | 6 | 150 | 150 | 3530 | 180 | 1 | 377 | 500 | 875 | 1088 | 1350 | 373 | 350 |
SHL-200 | 8 | 200 | 300 | 5650 | 210 | 1 | 377 | 700 | 1175 | 1388 | 1950 | 373 | 350 |
SHL-250 | 10 | 250 | 400 | 7910 | 305 | 1 | 480 | 700 | 1195 | 1398 | 1950 | 403 | 420 |
SHL-300 | 12 | 300 | 600 | 10880 | 340 | 1 | 480 | 1000 | 1495 | 1698 | 2550 | 403 | 420 |
SHL-350 | 14 | 350 | 900 | 13820 | 540 | 1 | 610 | 1000 | 1545 | 1749 | 2600 | 443 | 480 |
SHL-400 | 16 | 400 | 1100 | 13820 | 555 | 1 | 610 | 950 | 1545 | 1749 | 2600 | 443 | 500 |
SHL-450 | 18 | 450 | 1500 | 13820 | 730 | 1 | 720 | 950 | 1555 | 1749 | 2600 | 443 | 550 |
How to choose the suitable model
Please clarify below parameter:
1.water flow rate
2.Chemical characteristic of fluid
3.SS of fluid
4.filter precision
5.Pipe pressure
6.Working pressure
7.Direction of flow
8.drainage way
