1. Application
Gold mine centrifugal slurry pump is used for delivering slurry with strong abrasion and high concentration for
metallurgy, mines, coal and power plant, etc.
• Mining • Mineral processing • Construction • Chemical and Fertilization • Power generation | • Phosphate matrix fertilization • Pulp and paper • Waste sludge • Paper mill wastes and liquors • Precipitated CaCO3 | • Plaster • Bottom/fly ash, lime grinding • Dirty water • Pulp and paper • Oil and gas |
• Waste water treatment • Ball mill discharge • Rod mill discharge • SAG mill discharge • Fine tailing | • Flotation • Heavy media process • Minerals concentrate • Mineral sands • Coal-washing plant | • Coarse sand • Coarse tailing • Dredging • FGD • Wet crushers applications |
• Wet scrubber systems • Process chemical • Iron and Steel • Fracking slurries | • Clay and sand slurries • Kaolin clay • Carbon slurry • Lime mud • Oil sands |
• Phosphoric |
Typical Application:
· Chemical Process
· Heavy Minerals
· Paper and Pulp
· Mill Discharge
· Sugar Beet
· Slag Granulation
· Bottom Boiler and Fly Ash
· Cyclone Feed
· Power Plants
· other industry
2. Features:
♦ Our Pump wet parts are made of wear-resistant high chromium alloy. Top Quality Materail
♦ Our Pump bearing assembly use cylindrical structure, adjusting the space between impeller and front
liner easily. They can be removed completely when being repaired. Bearing assembly use grease
lubrication. International famous brearing
♦ The shaft seal could use the packing seal, expeller seal and mechanical seal for all slurry pump.
♦ The discharge branch can be positioned at intervals of 45 degrees by request and oriented to
any eight positions to suit installations and applications at its working site.
♦ There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and
frequency conversion drive devices.
♦ Wide performance, good NPSH and high efficiency. The slurry pump can be installed in
multistage series to meet the delivery for long distance.
3.Specification :
Slurry pump type | KA Series | KH Series | KL Series | 10/8E-KM |
Discharge Diameter | 25~450mm | 25~150mm | 20~650mm | |
Flow Capacity | 6.5~5000m3/h | 7~900m3/h | 3.6~10500m3/h | |
Head | 5~55m | 20~95m | 5~55m | |
Material | A05,A31,A33,A49,Rubber | A05,A31,A33,A49 | A05,A31,A33,Rubber
| A05,A49,A33,Rubber |
Slurry pump structure:
