Basic information of air and dirt separator
This valve is used to remove air mass and microbubbles in the circulation system.
Features of Dirt Separator & Air Realease
1. Pressure drop is very low and will not cause the hydraulic imbalance to the system;
2. Reduce the system commissioning time after initial flooding;
3. Install in flexible locations, not at the top;
4. Removal of residual air is remarkable.
Principle of Dirt Separator & Air Realease
The valve adopts a unique spiral-type filter to collect air mass and micro air bubbles in the medium through the spiral groove of the filter core. Large air bubbles rise to the gas collecting chamber in the upper part of the separator. When the system is in normal operation, they are discharged through the air release valve at the top.
Principle of Dirt Separator & Air Realease
The valve adopts a unique spiral-type filter to collect air mass and micro air bubbles in the medium through the spiral groove of the filter core. Large air bubbles rise to the gas collecting chamber in the upper part of the separator. When the system is in normal operation, they are discharged through the air release valve at the top.
Installation and Commissioning of Dirt Separator & Air Realease
This valve needs to be installed horizontally on the pipeline. It is recommended to be installed at the higher temperature or lower pressure in the system. Leave enough room for operation and maintenance around the upper and lower areas. For specific use, please consult ZECO Valve Group.
Part | Material | Standard |
Body | WCB | ASTM A216 |
Bonnet | WCB | ASTM A216 |
Bolts/Nuts | Stainless Steel 431 | EN10088-1/ASTM A959 |
Seal | EPDM / NBR | ISO 4633 |
Filter | PPO | ISO 4633 |
Air Release Valve | CuZn39Pb1 / C37000 | EN12167/ASTM B135 |
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys. | ||
Product scope, Standards & Materials of Dirt Separator & Air Realease
Size Range: 2"~40"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
ZECO is a professional china control valve supplier, we provide check valve, gate valve, butterfly valve, control valve, water valve and etc. Want to know more, please contact us.
