| 1 | machine structure | cast iron roller fixer |
| 2 | Main power | 5KW siemens motor |
| 3 | Forming stations | 12 stands |
| 4 | Way of drive | high quality gear drive |
| 5 | Diameter of shaft | 70mm |
| 6 | Max rolling speed | 20-25m/min(Max can be 80m/min) |
| 7 | Thickness | 0.3-0.5mm galvanized steel or prepainted sheet |
| 8 | Material width | 40-60mm as the angle steel size |
| 9 | Material of roller | Cr12 |
| 10 | Material of blade mould | Cr12, quenched 58-62 |
| 11 | Way of cutting | hydraulic mould cutting(non-stop to cut) |
| 12 | Length cutting tolerance | +/-1.0mm |
| 13 | Hydraulic pressure | 16Mpa |
| 14 | Hydraulic power | 4kw |
| 15 | Computer Control system | PLC control Delta |
| 16 | Encoder measure | Omron |
| 17 | Electrical requirement | 380V,50Hz,3Ph |
Hydraulic station of 45m/min PPGI L ANGLE Gypsum Ceiling steel Forming Machine
To improve stability and prolong life time, this machine adopts powerful 4 KW hydraulic station.
A: The special point of this hydraulic station is : it is equipped with big fans.
Due to hot weather and long time working, hydraulic oil performance will decline. Big fans can cool oil temperature effectively.
B: The motor is energy-efficient. It can save much energy and long life-time.
