BZ-65C/85C/105C Battery cable cutter
Cutting range dia 65/85/105mm
Output 60/60/120KN
Cable Cu/Al cable, armoured Cu/Al cable
Hydraulic oil SHELL TELLUS T15
Data Sheet
| Technical data: | |||
| Item No: | BZ-65C | BZ-85C | BZ-105C |
| Crimping range: | Φ 65mm | Φ 85mm | Φ 105mm |
| Rated output: | 60KN | 60KN | 120KN |
| Rated pressure: | 63Mpa | 63Mpa | 66Mpa |
| Oil capacity: | 115ml | 115ml | 170ml |
| Max pressure: | 70Mpa | ||
| Cable: | Cu/Al cable, armoured Cu/Al cable | ||
| Battery: | DC 18V 3.0Ah Li-ion battery | ||
| Charging voltage: | AC 100V-240V, 50-60Hz | ||
| Charging time: | 2hours | ||
| Retraction mode: | Spring retraction( use with single action pump) | ||
| Hydraulic oil: | Shell Tellus T15 | ||
| Working temperature: | -10-40℃ | ||
Micro computer control systerm-automatically detectes the pressure when in crimping with double safety protect
* The tool is equipped with a double piston pump which characterized with a fast approach towards the connecting material and
transfer to high pressure automatically by slow crimping
* If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red
display flashes.
* One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means
piston return to the original position
* A temperature sensor makes the total stop working automatically whenthe temperature is over 60℃ under long time working, the
fault signal sounds, it means the tool can't continue to work until temperature reduced to the normal
