1. It can measure the basic functions such as generator steady-state three-phase voltage, current, active power, frequency, and running time; (reactive power, apparent power, power factor, etc. are reserved functions).
2. It has the function of harmonic analysis, which can analyze the 2~50th harmonic content and total harmonic content of voltage and current at the same time; electric energy accumulation function.
3. The function of transient test (sudden loading and unloading of load) can automatically test the maximum and minimum values of voltage, current, frequency, and recovery time when the load changes suddenly.
4. It has powerful voltage recording function, and is equipped with photoelectric isolation RS485/RS232 serial communication function. The serial port function is powerful.
5. Not only can call and measure all steady-state parameters, but also call and measure sudden addition, sudden discharge, voltage, current, frequency curves, and voltage and current harmonic curves and harmonic content.
6. Used in conjunction with the host computer, it can automatically complete the measurement of all electrical parameters of the generator. Automatically generate various charts, curves and inspection reports. Standardized operation and strong authority. The data is rich in content, the report has strong applicability, and can be signed and formatted according to user needs.
7. The total load control function can complete the sudden loading and unloading functions of the load (the water load does not have this function).
8. The remote control function can realize manual control loading and unloading through the remote controller.
9. It has the function of collecting water load data, and reserves the terminals of the current transformer.
10. The functions of sudden addition and sudden removal are automatically controlled by the computer, and the power setting is manually controlled on the panel or controller.
11. It has the functions of temperature detection and protection and fan fault detection and protection.
12. The segmented power input mode is optimized, and the setting is convenient (10kW~3000kW at most).
13. Realize intelligent control, which can automatically test various parameters of the generator set including dynamic parameters. It provides a scientific detection method for high-power generator sets.
