Hydraulic Motor Walking Crawler Chassis Track Undercarriage For Drilling Machine
Product Description
Crawler undercarriage, including engineering machinery undercarriage, skid steer loader undercarriage, agricultural machinery undercarriage, garden machinery undercarriage and the matched spare parts: track roller, top roller, sprocket, idler and rubber track.
Product Specification
Type : 2T/2.5T | Bucket size: 1930*1700*500 mm |
Size: 3050*1700*1470mm | Crawler material: Rubber material |
Track ground length: 1350mm | Loading &unloading method: Hydraulic dump |
Motor size: 186 | Gear type: drawbar |
Gear: +3 forward gear+1 reverse gear | The height from the bottom of the bucket to the ground: 620 mm |
Steering method: Clutch brake steering | Start method: Electric start |
Standing slope angle: 35 degree | Crawler Width size: 1630 mm |
Crawler Drill Main Features
1. Crawler has strong carrying capacity, can withstand 2.5 tons of weight, large climbing capacity, simple operation and high drilling efficiency.
2. The four feet of the crawler chassis are hydraulic feet, and each foot is controlled separately, so that the entire crawler platform can be stably fixed on the ground.
3. Crawler platforms and drilling rigs are welded with square tubes. The design structure has high strength and good rigidity, and can be used for drilling rigs below 300 meters.
4. Crawler drilling rigs can be loaded with north exploration, long exploration, balance exploration, wide exploration and heavy exploration drilling rigs. Crawler tower can be customized according to the customer's drilling rigs.
Product Advantages
Our Rubber Track are prepared with natural rubber. It possesses very good properties of wear resistance, tear resistance and non-disintegration etc. The adhesion between the rubber and the steel frame is very strong, the replacement is convenient an the service life is long,it is suitable for various vehicle like excavator,pavers,bitumen transportation trucks etc.
Product Application
Crawler chassis assembly is mainly used for special occasions, such as military parade, tanks, armored vehicles, etc. What are its advantages: rubber track has the advantages of protecting the ground, rubber track walking system, low noise, low vibration, comfortable riding, etc. It is suitable for situations with high speed and many transfers, and achieves the all-road performance. Reliable electrical instruments and complete machine status monitoring system provide reliable assurance for the driver to operate correctly
Due to the different use methods and soil conditions, the working life of rubber track also varies greatly. Generally speaking, its average life is about 2000 hours. However, when working in rock or easily worn environment, the service life will be halved; On the contrary, the working life will be doubled in a better environment. When the user checks the track and chassis, don't forget to drive again to check the oil level and cleanliness. This part is easy to be ignored, and there is usually less oil left.
The Crawler Rig Maintenance
1. The operating temperature of rubber track is generally - 25 ° -+55 °.
2. The salt of chemicals, engine oil and sea water will accelerate the aging of the track. Clean the track after use in such an environment.
3. The road surface with sharp bumps (such as steel bars, sharp stones, etc.) will cause damage to the rubber track. Try to avoid these sharp bumps.After the drilling is completed, the tower shall be put away to avoid personal injury. It is not allowed to walk without putting the tower away for convenience.
