.jpg)
Extruder For Magnet Strip
The extruder is mainly consisted by host temperature control cabinet (host control cabinet for short), traction-cooling, magnetization cabinet set (magnetization cabinet for short). The screw's rotate speed and screw canister's temperature are control by the host control cabinet. The rubber magnetic compounds are extruded into strips, then go thru the water tank for cooling. After cooling, the magnetic strips go thru the dryer to let the water absorbed, lastly, they go thru the magnetization poles in the water tank for magnetization, then they could be winded into roll. The magnetization cabinet is used for control the traction, winding and magnetization of the magnetic strips. When in producing, only adding material and get out the final products are manual work, all the others are automotive.
Technical data:
- Screw Stem Diameter: 60mm
- Length: Diameter: 9
- Compress Ratio: 1.39
- Screw stem rolling speed: 0-24r/min
- Extruding motor power: 11kw
- Traction motor power: 0.75kw
- Rolling motor power: 0.55kw
- Heating power: 2.9kw
- Hopper mixing power: 1.14kw
- Magnetizing power: 5kw
- Cooling water quantity: 0.6m3/h
- Heating temperature controlled range: 0-120 oC
- Total weight: 3000kg approx.
- Occupied ground area: 5000×2000mm2
For more detail info, please feel free to visit our website or inquire us at any of your convenience.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
