.jpg)
Chillers can be either air-cooled or water-cooled.
Air-cooled chiller requires less maintenance than water-cooled unit and it dispenses with the need for cooling towers. However, the air-cooled chiller generally consumes approximately 10% more power than a water-cooled unit. It transfers the heat absorbed to surrounding air directly.
Air-cooled chiller requires less maintenance than water-cooled unit and it dispenses with the need for cooling towers. However, the air-cooled chiller generally consumes approximately 10% more power than a water-cooled unit. It transfers the heat absorbed to surrounding air directly.
Water-cooled chiller absorbs heat from process water and transfers it to a separate water source such as a cooling tower, river or pond. A cooling tower is a must if there is no direct discharge source like river or pond. The water could be reused after special treatment to remove the dusts and impurities.
There are SWC series water-cooled chillers and SAC1series air-cooled chiller for you choosing. Please kindly contact us for you detail request.
Features:
1.cooling temperature range 5-35 centigrade temperature.
2. High-capacity tube-in-shell evaporater with very good heat exchange performance especially under high ambient temperature condition.The heat exchange power is:15KW
3.Tube-fin double condensers with excellent heat transfer and rapid cooling.The efficiency of condensers is 17.5KW
4. Stainless steel warm-keeping water tank.
5. Overload protection for compressor, pump and blower.
6. Warm-keeping design for all piping to avoid partial convection.
7. Independent temperature controller, anti-freeze protection.
8. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
9. R22 refrigerant to be used for efficient cooling.
2. High-capacity tube-in-shell evaporater with very good heat exchange performance especially under high ambient temperature condition.The heat exchange power is:15KW
3.Tube-fin double condensers with excellent heat transfer and rapid cooling.The efficiency of condensers is 17.5KW
4. Stainless steel warm-keeping water tank.
5. Overload protection for compressor, pump and blower.
6. Warm-keeping design for all piping to avoid partial convection.
7. Independent temperature controller, anti-freeze protection.
8. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
9. R22 refrigerant to be used for efficient cooling.
Water-cooled Chiller
Industrial chillers are used for controlled cooling of products, mechanisms and factory machinery in a wide range of industries, including plastic injection and blow molding industry. The industrial chillers assist to improve the production efficiency and minimize the rejection ratio of finished products. A chiller will use either a vapor compression or absorption cycle to cool.
Chillers can be either air-cooled or water-cooled.
Air-cooled chiller requires less maintenance than water-cooled unit and it dispenses with the need for cooling towers. However, the air-cooled chiller generally consumes approximately 10% more power than a water-cooled unit. It transfers the heat absorbed to surrounding air directly.
Air-cooled chiller requires less maintenance than water-cooled unit and it dispenses with the need for cooling towers. However, the air-cooled chiller generally consumes approximately 10% more power than a water-cooled unit. It transfers the heat absorbed to surrounding air directly.
Water-cooled chiller absorbs heat from process water and transfers it to a separate water source such as a cooling tower, river or pond. A cooling tower is a must if there is no direct discharge source like river or pond. The water could be reused after special treatment to remove the dusts and impurities.
There are SWC1 series water-cooled chillers and SAC1 series air-cooled chiller for you choosing. Please kindly contact us for you detail request.
Features:
1.Range of cooling temperature is 5¡æ to 35¡æ. (Standard one, adjustment will be applied once special requirements are received).
2.High-capacity tube-in-shell evaporator has very good cooling performance in high temperature environment.
3.Tube-fin double condensers with excellent heat transfer and rapid cooling.
4.Stainless steel thermal water tank.
5.Overload protection for compressor, pump and blower.
6.Independent temperature controller, antifreeze protection.
7.Phase sequence protection for control circuit, refrigerant system is controlled by high and low pressure switch.
8.Warm-keeping design of whole pipeline to avoid partial convection.
9.Equipped with main electrical apparatus of famous brands such as Schneider, Copeland, Daikin and Panasonic.
10. A standard machine can be customized to meet your exact requirements (we can provide >100HP chillers).
.jpg)
