Features:
1) Introduced from Japan advanced technology
2) Can save the energy 30% to 50% comparing the traditional Taiwan type dryer
3) The air would firstly be heated up when driven down by the blower through the space between inner drying cylinder and outer heating tube, then enter into the inner heating tube to be further heated into high temperature hot air, this hot air come to the middle material tank
to dry material directly, owing to this material obtains more concentrated heat before entering to the molding machine screw, the dry effect therefore becomes more directly and swift, the temperature accordingly can set lower 20% to 30% than traditional Taiwan type hot
wind dryer, furthermore shorten the preheating time significantly
4) HD-100 and HD-200 equip with hot air recycle unit. To avoid the materials melt in the tank, temperature should be set from lower to the suitable level gradually
5) The important parts of the dryer are made of stainless steel, improper operation may not burn down the drying cylinder, heating tube or damage the material tank