.jpg)
Advantages
Little affect area , no distortion , deep , welding firmly. Dissolve fully,without leaving any traces of repair No sag phenomenon disappeared at the junction.
Applicable to to repair cracks , collapsed horn , touched edge and damaged sealing side
Applicable to welding on horniness material (~HRC60)
High accuracy , the welding spot diameter is only 0.2mm-0.5mm
Little affect area , no distortion of the processing parts.
No effect for etch after welding , low oxidation rate ,the color of the processing parts is intact .
No stomata or sand hole disappeared after welding.
Can process at the welding point , especially applicable to repairing mound requiring polishing.
The processing parts can reach 50-60 rockwell hardness.
Main technical indicators:
Operating voltage: single-phase 220VAC ± 10% 50HZ
Operating voltage: single-phase 220VAC ± 10% 50HZ
Maximum laser output average power: 150W
Maximum energy of single pulse :120J
Pulse width: 0.5 ~ 20MS
Laser wavelength: 1064um
Batter, laser welding frequency: 0.5 ~ 100HZ
Pulse width: 0.5 ~ 20MS
Laser wavelength: 1064um
Batter, laser welding frequency: 0.5 ~ 100HZ
Optional adjustable spot size range: 0.2-2MM
Laser Power Supply:
Maximum Power: 8KW
Water pressure protection: ≤ 0.025MPa
Cooling water temperature: ≤ 35 degrees temperature protection : 45 degrees
Maximum Power: 8KW
Water pressure protection: ≤ 0.025MPa
Cooling water temperature: ≤ 35 degrees temperature protection : 45 degrees
Cooling water flow: 10L/min
Laser welding wire: 1 ~ 0.2 Optional
Laser welding wire: 1 ~ 0.2 Optional
Observation System:
The observation system of the special microscope equipped with a cross cursor magnify 20X. Crosshair center
aligned with the laser spot center (user can adjustable). With a high-speed electronic filter protection device
to protect the operator from being eye injuryed, to ease the operator eye fatigue, improve work efficiency.
Control system:
Employed industrial PC with built-in for the dual closed-loop precision control. Its stability and running ability is far superior to similar products used by microcontroller control panel.
Gas protection system:
Synchronization with the internal computer-controlled argon gas protection system, can not be oxidized ,weld seam is more strong, beautiful. Use of synchronization with the laser emission control, to maximize savings argon.
Three-dimensional table travel: 200MM × 200MM × 300MM.Can precisely move the workpiece can precisely
.jpg)
.jpg)
