MDF board

Size:1220*2440,1830*3660 or according to buyers' requirements
  Thickness: 2.5-32MM
  Glue: MR, E1,E2
  Density: Approx 750kg/m3
  Properties
  Moisture:4%-13%
  Density: tolerance:+/-7%
  Modulus of inner combination:0.45MPA
  Modulus of surface combination:≥1.2MPA
  Formaldehyde emission level
  E0:Average under 0.5mg/L. i.e. under 3mg per 100g
  E1:Average under 1.5mg/L. i.e.under 9mg per 100g
  E2:Average under 5mg/L.i.e.under 30mg per 100g
  Surface: sanding / pressed
  Screw holding face: 1300N
  Screw holding edge:800N
 Uses
 It could be used to make display cabinets, wall-panels and storage units. It's also Widely used for furniture, indoors decoration, etc
 Adavantages
1.It is dense, flat, stiff, has no knots and easily to be machined.
2. It does not have an easily recognisable surface grain.,because it is made up of fine particles.
3. It can be easily painted to produce a smooth surface.
4. It have low "tear out," which means that when sawed, the end has a smooth cut instead of a jagged edge. This also means that a coat of primer and a couple of coats of paint take well, leaving an attractive, finished surface unlike other composite wood products.
5. MDF have good Density: profile with high bending strength and modulus of elasticity, dimension stability.
6.The MDF also with low formaldehyde content, smooth stable surface of MDF make it an ideal substrate for surfacing with decorative paper or PVC foils and direct painting.