Switching Power Supply 12V 6A 75W Enclosed Type
| Input Voltage | 88 ~ 264Vac 125 ~ 373Vdc (Withstand 300Vac surge for 5sec. Without damage) |
|---|---|
| Input Frequency | 47 ~ 63Hz |
| Input Current | 2A/115Vac 1.2A/230Vac |
| Inrush Current | 40A/230Vac cold start |
| Leakage Current | <2mA / 240Vac |
| Set Up, Rise Time | 500ms, 30ms/230Vac 1200ms, 30ms/115Vac at full load |
| Hold Time | 60mS/230Vac 14mS/115Vac at full load |
| Over Load Protection | 110 ~ 150% rated output power |
| Hiccup mode, recovers automatically after Fault condition is removed | |
| Over Voltage Protection | Hiccup mode, recovers automatically after fault condition is removed |
| Working Temperature | -25°C ~ +70°C (Refer to output load derating curve) |
| Working Humidity | 20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity | -40°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient | ±0.03%/°C (0~50°C) |
| Vibration | 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| Safety Standards | UL60950-1, TUV EN60950-1 Approved |
| EMC | Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; |
| EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) Heavy Industry Level, Criteria A | |
| MTBF | 265Khrs min. MIL-HDBK-217F (25°C) |
