PAINT ROLLER

Important: The "Paint N Roll"paint roller should only be used with water based and water dillutable liquids and paints such as latex.emulsion and acrylic paints.as not all of the components are resistant to solvents. To ensure a maximum possible working life for the "Paint N Roll" paint roller. you should clean the equipment thoroughly immediately after each use.

End of work, cleaning and maintenance:
1\Pull the piston rod back to draw the excess paint out of the paint roller and back into the paint tube.
2\Push the intake valve onto the intake tube.
3\Push the piston rod forwards; pushing the rest of the paint back in the paint container.

Window cleaner:
1\Press the quick release lever on the top the paint tube and clip the cleaner into place.
2\Clip the intake tube on to the edge of the water tin and push the intake tube down to the bottom of the tin.
3\Align the roller valve above the intake tube.
4\Push the intake valve firmly onto the intake tube.
5\To fill the water push the piston rod back and repeatedly push the rod in and out to draw the water into the tube.
6\Detach the intake valve from the intake tube.
7\To begin cleaning, push the piston rod in gradually and when water appers on the soft cleaner,you are ready to cleaning.
8\Finally Use the rubber cleaner for dryer.
9\Cleaning the basic unit and the cleaner thoroughty immediately after each use.(Refer to the Paint Roller:cleaning and maintenance,conservation and storage.)