10kW single phase 110/220/230/240V to three phase 380/400/415/440V inverter
Single Phase to 3 Phase Converter
The SDT series single-phase to three-phase converter, adopted AC-DC-AC circuit structure and using SPWM modulation control technology,
which can convert ordinary single-phase power to industrial three-phase power. After through SDT series single-phase to three-phase converter power conversion, the three-phase power output is standard pure sine wave,
the harmonic distortion rate(THD) is less than 2%, totally meet the national standards
of three-phase power quality, applicable to all types of load.
The SDT series single-phase to three phase converter can solve production
inconvenience because of some areas with the three-phase electric power restrictions,
also solved some user requirements that can't apply for the three-phase electric because of space limitation.
Technical Features:
1) The input voltage, output voltage, frequency and phase can be custom made.
2) Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start. VFD is especially used for taking 3 phase inductive load more easily. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
3) Output AC Power is suitable for all types of home appliances,electric tools, electric motors etc.
4) Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function for short circuit, over load, over temperature. Service life can reach 15-20 years.
5) Pure sine wave output. with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features.
6) Adopted low frequency isolated transformer, safe and reliable, single phase input power is completely isolated from three phase output power, high conversion efficiency, high instantaneous power, stable performance and low load loss.
7) Adopts new magnetism material, largely reduce machine consumption, making efficiency maximum up to 98%.
8) Adopts America DSP chip, safe and reliable.
9) Adopts black pure aluminum radiator, which confirms the best radiating performance
10) Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the back end devices
11) Intelligent fan speed control system, low no-load loss
12) LCD display, high efficiency, easy installation
13) The output frequency 50Hz/60Hz can be set
Technical Data
Model | SDT-10KW | |
Isolation mode | Low Frequency Transformer | |
AC Input | Input rated voltage (Vac) | Single phase 220V |
Input rated voltage range | 110/120/220/230/240Vac optional | |
Input rated current(A) | 45.5A | |
AC Output | Rated output power | 10KW |
Output waveform | Pure sine wave | |
Phases | Three phase, 4 wire | |
Output rated voltage | 380VAC ±3% | |
Output voltage range | 220/380/400/415/440/480Vac optional | |
Output rated current | 15A (phase current) | |
Output Frequency | 50Hz/60Hz±0.05Hz | |
Power Factor(PF) | 0.95 | |
Overload Ability | 150%, 10s | |
Efficiency | >94% | |
Waveform distortion rate (THD) | <3%(Linear load) | |
DynamicResponse(0 to 100% load) | 5%,≤50ms | |
Display | LCD | |
Running mode | Working continuously | |
Electrical insulation properties | 2000Vac, 1 Minute | |
Protection function | Protection | Input under voltage, over voltage, output over-current, short circuit, overheating etc. |
Cooling method | Fan-cooled | |
Short-circuit protection | Noautomatic recovery, need to restart the machine | |
Working environment | Ambient temperature | -15~+55℃ |
Using environment humidity | 0~90%,No condensation | |
Noise ( 1 meter) | ≤50dB | |
Degree of protection | IP20(indoor) | |
Using altitude(m) | ≤2000 | |
Dimension (mm) | 540x540x760mm | |
CE Standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | |
