Name: WDR BOX CAMERA
Model # : SC-678ADWA
Overview
1/3'' SONY Super HAD II CCD
Passed rigorous electromagnetic interference tesing
Over-low power consumption,only 60mA current
100dB wide dynamic range
Digital noise reduction
OSD menu function
1/3'' SONY Super HAD II CCD
Passed rigorous electromagnetic interference tesing
Over-low power consumption,only 60mA current
100dB wide dynamic range
Digital noise reduction
OSD menu function
Back foucs adjustment
Features
Image sensor: 1/3'' SONY Super HAD II CCD
Passed rigorous electromagnetic interference tesing
Features
Image sensor: 1/3'' SONY Super HAD II CCD
Passed rigorous electromagnetic interference tesing
HME(Highlight Masking Exposure)
Masking for the light areas and make compensation to achieve the correct exposure within a specific area selection,this time frame will not receive too much light too dim to not recognize the feeling.(please use a fixed iris lens)
WDRC(Wide Dynamic Range Compressor)
In the same screen if there are large contrasts situation will result in over-exposed,too dark,when the screen starts WDRC function can significantly improve contrast.
SLC(Side Light Compensation)
Based on use of the lens may be some amount of light shot into the middle region than the edge are to the large,bright middle at this time will show the edge of the dark.This feature is made for compensation to the edge of uniformity the same picture quality.
Based on use of the lens may be some amount of light shot into the middle region than the edge are to the large,bright middle at this time will show the edge of the dark.This feature is made for compensation to the edge of uniformity the same picture quality.
DNR (Digital Noise Reduction)
In the illumination can save a lot of storage space.
In the illumination can save a lot of storage space.
OSD menu
Special patented design features to the icon display mode,intuitive and clear,so that users can set the content clear.Chinese/English options.
Special patented design features to the icon display mode,intuitive and clear,so that users can set the content clear.Chinese/English options.
Support Day&Night function
When using the elctronic conversion function day & night is available when Burst ON/OFF choice of remaining C color signal or removed.This feature is specifically disigned for LCD monitors,because some color LCD monitor can not display balck and white signal,so setting increased ON/OFF selection.
When using the elctronic conversion function day & night is available when Burst ON/OFF choice of remaining C color signal or removed.This feature is specifically disigned for LCD monitors,because some color LCD monitor can not display balck and white signal,so setting increased ON/OFF selection.
Gamma correction
When using different image reduction device,you can set different gamma values,to achieve the desired reduction effectl.
When using different image reduction device,you can set different gamma values,to achieve the desired reduction effectl.
Privacy masking function
When a region does not need the screen is displaed,can be protected in the region.
When a region does not need the screen is displaed,can be protected in the region.
BLC(Back Light Compensation)
Objects in the picture in the back of a bright light source,it can be caused due to the backlight dark part of the photo objects for backlight compensation,to be more distinct clear photo objects.
Objects in the picture in the back of a bright light source,it can be caused due to the backlight dark part of the photo objects for backlight compensation,to be more distinct clear photo objects.
CCD dead pixel repair
CCD dead pixel and automatically repair
CCD dead pixel and automatically repair
MOTION DETECTION/ALARM
Set the object detection region,when there are changes that sent the signal start(DVR or Alarm-Bell)
Set the object detection region,when there are changes that sent the signal start(DVR or Alarm-Bell)
Wide voltage setting
DC power supply,voltage range is between 10V-16V;AC power supply,voltage range is between 20V-28V.This design can greatly improve the life and stability of the camera.
DC power supply,voltage range is between 10V-16V;AC power supply,voltage range is between 20V-28V.This design can greatly improve the life and stability of the camera.
.jpg)
.jpg)
.jpg)
.jpg)
