3D wire mesh panel is a new wire mesh products, mainly used in
construction. It's high tensile and easy install are very popular by world
construction customers.
3d wire mesh panel also called two double layer welded wire panel, using
3d wire mesh panel also called two double layer welded wire panel, using
welded way join two pieces of welded wire panel together.
Foamed polystyrene insulating layer with the thickness of 100m/m in the
Foamed polystyrene insulating layer with the thickness of 100m/m in the
center, steel wire truss coated with zinc of 3m/m(3.8mm) between the
insulating layer is pinned at 2`` intervals, at both sides of which forms
up at 5Cm X 5Cm(5Cm X 10Cm) intervals with the wire mesh coated with zinc
of 3m/m(3.8mm) that is at fine-spun 50m(100m)intervals.
So the whole points of contact in all steel wires is joined in a spot
So the whole points of contact in all steel wires is joined in a spot
welding, which is a panel of 2.4m(4m) full length, 1.2m width, 60~200m/m
thickness.
Material:
1. Steel wire : steel wire with a diameter of 3mm(3.8mm) licensed by KSM
Material:
1. Steel wire : steel wire with a diameter of 3mm(3.8mm) licensed by KSM
O802 and coated with zinc in a tensile strength of 60~120kg/Cm2
2. Foamed polystyrene : licensed by KSM 3802 with a specific gravity of
2. Foamed polystyrene : licensed by KSM 3802 with a specific gravity of
over 0.015kg/Cm2. (Over 0.015kg/Cm2 is for the manufacturing order). size
is 2", 2.5" and 4".
3. Strength of Mortar : Normally 1:3 (70kg/Cm2)
3. Strength of Mortar : Normally 1:3 (70kg/Cm2)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
