Square Crystal LED Solar Road Stud
Solar Crystal Road Stud (Battery/Capacitor)
--Shining As Crystal.
--Architectural design.
--Over 5 years life, 1 year warranty.
--Shining As Crystal.
--Architectural design.
--Over 5 years life, 1 year warranty.
1. Battery/super capacitor with over 5 years circle life.
2. Flash or steady lightening at your request.
3. 8 hrs in sunny day for full charge, up to 72 hrs working.
4. Compression resistance up to 10 tons & over 1000m viewing distance.
5. Waterproof level up to IP68.
Technical features
Item | Description | |
Model | RSPS-FT-1 (one way) RSPS-FT-2 (two way) | |
Size: | 100*100*20mm | |
Weight: | 0.26kgs | |
Packing: | In carton. 48pcs/carton, Carton size: 38*28*28cm | |
Solar cell | Type | Mono crystalline |
Battery | Type | Heat-resistance Ni-MH |
Circle life | 1000 circles over 5 years | |
Work temperature | -20°c—+70 °c | |
LED | frequency | 2Hz or steady |
size | Φ5mm | |
number | 6PCS | |
Color | White, yellow, red, blue, green | |
Flash way | Blink or steady | |
Luminous intensity | Over 5000 mcd | |
Output on full charge | up to 72 hours blinking(two way), 48 hours constant lightening(one way) | |
Time to full charge | Time to full charge 8 hr in 100Klux(sunny day) | |
Compression resistance | 10 tons | |
Starting intensity | 300 LUX | |
Application situation | Edge line | |
Life in use | 5 years | |
Warranty | 1 year | |
Material of body shell: | PC | |
Water proof | IP68 | |
View distance: | over 1000m | |
Installation Procedure:
1. Check if the solar stud charge and discharge in normal way;
2. Identify the place and distance for installation and clean road surface;
3. Clean the bottom of the solar stud and glue the bottom, make sure the whole bottom is covered by glue
4. stick road stud onto the road surface.(You can also lay on road surface some glue)
5. Steady it with two screws if road condition is bad such as sandy road.
6. Dont put them into use till 8 hours later when they are completely dry.
7. Can be also installed onto column post.
.jpg)
