Introduction:
1.Anti-interfere function. When someone interferes it with same frequency, the control unit will activate siren to alarm.
2.Support anti-decode with remote control
3.6 programmable Defense zone available, with status LED. The control panel can register 99 sensors and detectors. Every defense zone can set independently arm, disarm, delay alarm and so on.
4.Have the function of "one-key arm". User can start "Home arm" or “Out arm” freely by keeping pressing one key on remote control to satisfy your need.
5.Can set the reminder sound of defense zones. Will remind users of remembering arm the alarm system when going out.
6.It stores 2 groups of monitoring center and 6 groups of user phone numbers to dial out and play the recorded message if there is an alarm.
7.Can arm/disarm with remote control or keypad on the control panel
8.Can arm/disarm/listen-in by calling the host phone number (The phone numbers of control panel).
9.Have the function of reminder for circuitry failure. For example, if telephone line is cut or short, the control panel will alarm.
10.Have in-built backup battery and can continue to work and last for 8---10 hours when electricity is cut or in failure.
11.With international Ademco Contact ID, can work with the monitoring center.
Technical Parameters :
·Power supply:AC=220V±10% DC=9V -12V
·Inner Power: Ni-Mh battery, DC=7.2V
·Static Current:I ≤50mA
·Alarm Current:I ≤300mA
·Wireless Frequency:315/433MHz±0.5MHz
·Wireless Receiving Sensitivity:5mV/ m
·Outer Alarm Siren Volume:110db
·Working ConditionTemperature-10~40℃
·Humidity:≤90%
·Capacity for Wireless Device:99pcs
Standard pack components
1 X main panel
1 X main panel
1 X wireless infrared (motion) detector
1 X wireless door magnetic detector
1 X siren
2 X remote controllers
1 X power supply
1 X manual
Weight : 1.2Kg/set
Size: 153*100*30 mm
