Scaffolding parts lifting plate
Tie bracket unternal splice
Hinge-waler connector connecting pin with clip
Compression plate internal corner
Double jointed foot plate prop connector
Alform Clip Wedge Q
Wall formwork system
Alform Clamp it is used to clamp alform beam waling to the steel U-profile at any height.
Lifting Bracket used to provide lifting position for crane handling. Usually two lifting
Internal Splice can be jointed at the end of the U-profile and secured using four connecting pin and clips.
Prop Connector fitted to U-profile by wegde Q, they provide attachement for push-pull props.
Hinge-waler Connector used when there is a change in angle between forms and can be used in circular structure.
Wedge Q is a heavy-duty drop forged wedge, which provides high strength connections.
| Lifting Plate | Tie Bracket | ||
| Code | Mass(kg) | Code | Mass(kg) |
| LP25 | 4.4 | TB26 | 2 |
| Internal Splice | Hinge-waler Connector | ||
| Code | Mass(kg) | Code | Mass(kg) |
| IS27 | 6.5 | HC28 | 4.8 |
| ConnectingPin with Clip | Compression Plate | ||
| Code | Mass(kg) | Code | Mass(kg) |
| CP29 | 0.2 | CP30 | 0.9 |
| Internal Corner | Double-jointed Foot Plate | ||
| Code | Mass(kg) | Code | Mass(kg) |
| IC31 | 65 | FP32 | 3.4 |
| Prop Connector | Alform Clip | ||
| Code | Mass(kg) | Code | Mass(kg) |
| PC33 | 1.9 | AC22 | 0.7 |
| Wedge Q | |||
| Code | Mass(kg) | ||
| WQ21 | 0.4 | ||
.jpg)
