Monel Sheets (Plate Strip)
Monel Sheet includes two kind of alloy products: Monel 400 and Monel K500 .
1. Monel 400Sheet(Plate Strip):
Monel Sheet includes two kind of alloy products: Monel 400 and Monel K500 .
1. Monel 400Sheet(Plate Strip):
Monel 400 alloy Sheet is corrosion resisting such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Meanwhile, it exhibits characteristic like high strength. Monel 400 sheet (Plate Strip)has low corrosion rate in flowing brackish or seawater while performing excellent resistance to stress-corrosion cracking in most freshwaters. This sheet's good resistance to a variety of corrosive conditions contributes to the wide application in marine and other non-oxidizing chloride solutions. Monel 400 sheet (Plate Strip) is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. However, its high copper content, make alloy 400 can be rapidly attacked by nitric acid and ammonia systems.
Manufacture's Objective Comments to Monel 400 Sheet:
Monel 400 sheet (Plate Strip)is immune to chloride ion stress corrosion cracking in typical environments. Besides, it is good corrosion resistant in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Monel 400 Sheet would be attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F. However, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.
2. Monel K 500 Sheet (Plate Strip):
Monel K500 sheet (Plate Strip) combines the excellent corrosion resistance of Monel 400 Sheet with the added advantage of greater strength and hardness. It has approximately three times the yield strength and double the tensile strength when compared with alloy 400. When in the age-hardened condition,Monel K500 Sheet (Plate Strip) has a greater tendency toward stress-corrosion cracking in some conditions than Monel 400 alloy Sheet. The strength of this nickel Copper alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F. Nickel alloy K-500 Sheet has a greater tendency toward stress-corrosion cracking in some environments. Monel K500 Sheet is resistant to a sour-gas environment. The combined Characteristics of very low corrosion rates in high-velocity sear water and high strength make alloy K-500 sheet particularly suitable for marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.
Manufacture's Advices to Monel K500 alloy Sheet:
This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.
Monel Sheets | |||||||||||
Type | Code Name | Chemical Composition%(weight) | |||||||||
Ni | Cu | Si | Mn | Fe | Ti | Al | C | S | |||
Monel 400 | UNS:No4400 | Min | 63 | 28 | |||||||
Max | 70 | 34 | 0.5 | 2 | 2.5 | 0.3 | 0.024 | ||||
Monel K500 | UNS:No5500 | Min | 63 | 27 | 0.35 | 2.3 | |||||
Max | 33 | 0.5 | 1.5 | 2 | 0.86 | 3.15 | 0.1 | 0.01 | |||
Monel R405 | UNS:No4405 | Min | 63 | 28 | 0.025 | ||||||
Max | 34 | 0.5 | 2 | 2.5 | 0.3 | 0.06 | |||||
NI-Cu alloy | NCu28-2.5-1.5 | Min | left | 27 | 1.2 | 2 | |||||
Max | 29 | 0.05 | 1.8 | 3 | 0.2 | 0.02 | |||||
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
