GM1 tilt cylinder crankshaft type radial plunger motor
| Model | Theoritic displ. ml/r | Rated Press.Mpa | Max Press.Mpa | Rated Torque N.m | Specific theoritic torque N.m/mpa | Max power Kw | Max continous speed rpm |
| GM1-100 | 99 | 25 | 42.5 | 385 | 15.4 | 48 | 1000 |
| GM1-150 | 154 | 25 | 40 | 600 | 24 | 48 | 1000 |
| GM1-175 | 172 | 25 | 37.5 | 670 | 26.8 | 48 | 900 |
| GM1-200 | 201 | 25 | 35 | 785 | 31.4 | 48 | 800 |
| GM1-250 | 243 | 25 | 35 | 950 | 38 | 48 | 700 |
| GM1-300 | 290 | 25 | 30 | 1130 | 45.2 | 48 | 650 |
| GM1-320 | 314 | 25 | 28 | 1225 | 49 | 48 | 600 |
| GM1-350 | 340 | 20 | 25 | 1060 | 53 | 48 | 550 |
1. Jointly developed with USA company
2. Completely interchanageable with original
3. High mechanical efficiency, high starting torque (at startup mechanical efficiency above 0.92)
4. Flat with simple, reliable converters to improve sealing performance, and thus low-speed stability is good, very little leakage. Volumetric efficiency above 0.97
5. Due to the structure to reduce friction losses, improve sealing performance, low-speed stability and thus the motor can operate smoothly 1r/min operating conditions
6. As piston ring and bearing sleeve through the card firmly affixed there is no gap, so the motor can do pump running conditions, when the inlet is closed motor operating conditions in the free round of high-speed operation
7. This series motor with the original appearance and installation dimension Italy SAI's basically the same performance parameters and the original fitted Italy SAI close, is an ideal choice to replace imported motor
it has following characteristic:
1. uses the eccentric shaft and inspires lowly rate five piston structures, thus has the low noise characteristic.
2. starting torques are big, the low-speed stability performance is good, can under the very low speed the steady revolution.
3. patent technology plane compensation matches the flow table, the reliability is good, divulges few, between the plunger and the shell uses the packing ring seal, thus has the very high volumetric efficiency.
4. Between crank and connecting rod by pin bearing supporting, thus has the very high mechanical efficiency.
5. The hand of rotation is reversible, output shaft permission certain radial direction and axial external force.
6. has the high power mass ratio, the volume weight relative small.
GM piston motor
GM piston motor
